Top 10 10 Inch 25 Hp Tilebrick Saw

Product description

Been putting off that kitchen or bathroom tile project? Lets get that off the to do list and complete tiling projects easily with the SKil model 3540, 7 in. Wet Tile Saw. The stainless steel top resists corrosion and the adjustable rip fence with miter gauge ensures accurate straight and miter cuts. Its 7-in included diamond blade ensures smooth cutting along with a blade cooling water reservoir that keeps the blade cool and minimizes dust and debris. Why rent one, when you can add this power tool to your collection for about the same cost? – Stainless steel table top – resistant to corrosion – Adjustable rip fence with miter gauge – for accurate straight and miter cuts – Bevel cuts tile from 0 to 45 degrees – flexibility for different cut types – Blade cooling water reservoir – keeps blade cool and minimizes dust and debris\nWe are an authorized SKiL dealer

From the Manufacturer

Skil Benchtop Power Tools are Quality Tools at a Great Price !

Amazon.com

MK Diamond’s MK-2001SV electric masonry saw is a powerful brick, stone, and cinder block saw that has a distinctive, innovative, open-back design. This design allows large materials to be easily cut and makes this saw an excellent choice for a wide range of heavy-duty tasks.

MK-2001SV Electric Masonry Saw At a Glance: Innovative open-back design for cutting large materials Cast aluminum structural components 1-1/2 horsepower, 115 volt motor 14.4 amps, 1,750 motor rpm, 2,540 blade rpm One-year limited warranty

The MK Diamond MK-2001SV electric masonry saw is powerful and full of helpful features (view larger.)

Powerful and Precise
The MK-2001SV electric masonry saw’s 14-inch blade capacity, 5-inch cut depth, and open-back design lets you cut materials up to 16 inches long. It has cast aluminum structural components, a jig-welded steel frame assembly, and a durable cast aluminum blade guard with stainless steel water tubes that are ready for extremes and won’t bow or rust–the stay-level blade guard also allows for a maximum cut depth at any head height. To help ensure long life and to make maintaining the saw easier, the drop down blade shaft assembly is constructed with sealed, permanently lubricated, long-lasting bearings. In addition, there is an adjustable water supply for thorough blade protection.

Ease of Use and Transportation
This saw has a convenient on/off switch to start and stop quickly and to add a level of user safety. To make plunge cutting quicker and not as difficult, the saw boasts a recoil spring return cutting head. Thanks to its lift brackets, the MK-2001SV electric masonry saw isn’t difficult to transport, and can be moved to the job site as needed.

Dimensions and Warranty
The MK Diamond MK-2001SV electric masonry saw measures 32 inches by 23 inches by 29 inches and weighs 157 pounds. It comes with a one-year limited warranty.

About MK Diamond
MK Diamond was started in San Francisco in 1868 by Joseph Musto, a fifth-generation Italian stone-cutter and tile-setter whose ancestors were renowned master craftsmen. He brought the skills of his forefathers to his new home in America and established the Musto Steam Marble Mill. The trademark of the business was its pledge to quality work and service–the Musto family always believed that good enough was never really good enough. It is in honor of this work ethic that MK Diamond continues its unrelenting pursuit of producing the highest quality products. By 1949, the newly named Musto-Keenan Company had gained a reputation for making superior diamond tools to cut marble and tile faster and more efficiently, and has today become established as a leader in providing precision power cutting tools and diamond blades. MK Diamond is committed to making products and services that are a benchmark for the rest of the industry.

What’s in the Box
One MK Diamond MK-2001SV electric masonry saw, rip guide, 14-inch diamond blade, electric water pump.

The MK-2001SV electric masonry saw has a unique open-back design, a stay level blade guard, and fork lift brackets for transporting.

From the Manufacturer

MK Diamond 161195 MK-2001SV electric 14-Inch wet/dry cutting masonry saw is the choice of professionals. The unique open back design allows for large materials to be easily cut. The cast aluminum blade guard has stainless steel water tubes that will not bend or rust. The blade shaft assembly is built with sealed, permanently lubricated, heavy-duty bearings for long maintenance free life. The recoil spring return cutting head makes plunge cutting quick and easy. Metal feet double as rugged rungs to accommodate moving saw with a fork lift. MK-2001SV saw has a 1-1/2-horsepower, 120-volt Baldor electric motor. Saw comes with 14-Inch dry/wet cutting diamond blade, electric water pump and rip guide.

The beast porcelain tile blades are designed to cut porcelain, Marble, Granite, and ceramic tiles. The thin kerf cutting edge allows for a clean, fast cut with virtually No chipping. The beast porcelain tile blades are engineered with a reinforced silent core hub which ensures straight cuts and greatly reduces noise.

Whether you’re updating or renovating, adding tile to your kitchen or bathroom is now easier than ever with the SKIL 7-inch Wet Tile Saw (3550). The saw’s innovative HydroLock System keeps water splash to a minimum so tiles can be cut in the room where they’re being installed. You no longer need to go back and forth to a saw set up in the garage or outside to cut the tiles, so the SKIL tile saw with HydroLock System helps you finish the project faster too! The 3550 works with a 7-inch continuous rim diamond blade, which provides efficient and even cutting. It also comes equipped with a durable rust-resistant aluminum table top and a sliding side extension that can be used to support tiles up to 18 x 18-inch.

The QEP 7 in. Wet Tile Saw is the only wet tile saw in its class to offer a rear extension to support large format tile where you need it after the cut is performed. Once the tile is cut, the rear table extension keeps the cut tile safe and secure. The powerful 3/4 peak HP motor will cut through unlimited sizes of the hardest tile including ceramic, porcelain, slate, marble and stone. Convenient flip up table for 22.5Degree and 45Degree miter cuts, adjustable rip guide and angle guide for a variety of cuts. Water spray containment baffle to help keep the surrounding area drier during cutting.

When you need to go that extra mile, Remington has you covered. Taking down hard-to-reach branches is one of the most important parts of yard maintenance. This 2-in-1 pole saw/chainsaw features a full wrap handle allowing for more maneuverability and versatility while cutting. And because the cord and handguard are always at the bottom of the pole, there are fewer snag hazards when you’re in pole saw mode. That’s good when you’re trimming branches up above your head. It also features a push-button quick change that allows you to convert to a chainsaw easily, without tools, so you can cut up those downed branches in no time.

Premium-grade, thin-rim diamond blade for fast wet cutting of porcelain, ceramic, granite and marble tile

Product Description

The Makita 4-3/8” Masonry Saw with 4” diamond blade (model 4100NHX1) is a powerful cutting solution that is ideal for a range of applications including stone, tile, and concrete. The 4-3/8” Masonry Saw is powered by a 12 AMP motor, with 13,000 RPM and a cutting capacity of 1-3/8”. Convenience features include a lock-off button, and a flat rear side motor housing that allows for easy blade changes. The saw weighs only 6.5 lbs. for improved operator comfort.

The 4100NHX1 also includes two Makita 4” Diamond Blades with turbo rim, engineered for constant contact with material for a smoother cut and finish.

From the Manufacturer

The Makita 4100NHX1 is a 4-3/8-Inch Masonry Saw with 4-Inch Diamond Blades. The Makita 4100NHX1 has Makita built motor which delivers 12 Amps for various cutting applications. The Makita saw has increased 1-3/8-Inch cutting capacity. The Makita Masonry Saw features more compact design at only 8-5/8-Inch long and weighs only 5.9 lbs. for less operator fatigue. The Makita 4100NHX1 has a lock-off button helps prevent accidental starts. Small and lightweight with plenty of power.

Product Description

The Big Foot 10-1/4″ Worm Drive Beam Saw was designed by a professional tradesman with 27 years of practical, on-the-job, carpentry, framing and remodeling experience. While the Big Foot Saw was originally designed for cutting 2 plates in one pass, we quickly found it could also cut any 4x materials in one pass, just as easily. The Big Foot Saw will cut your 4x headers, double 2x sandwich headers, exposed beams for decks, porches, 4×4 fence posts and 7 sheets plus of 1/2″ Plywood with one pass.

From the Manufacturer

Includes 36T CT Blade . Made by a framer for framers. Has a 3-3/4 in. depth of cut and will cut any 4x material at one time. It will cut your 4x headers, 2x sandwich headers, exposed beams, decks, porches, fence posts, etc. A must for decking or fencing. Cut all your roof blocks, joist blocks and fire blocks. Uses a 10 inch Thin Kerf Blade. Comes with 77 Skil saw motor, 10 in. blade and guard kit.