Nowadays, there are so many products of 13 hp go cart clutch kit 1″ in the market and you are wondering to choose a best one.You have searched for 13 hp go cart clutch kit 1″ in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 13 hp go cart clutch kit 1″ which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
643 reviews analysed
1. MOOSUN Torque Converter Comet Clutch Go Kart Clutch 1 Inch Replaces Comet TAV2 Manco 10T 40 or 41 and 12T 35 Chain Drive Belt (1" 10T 40/41 and 12T 35 Chain)
Feature
- Go Kart Torque Converter Kit is a direct replacement and fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, and 203814A 30-75 . Vehicles currently using a centrifugal clutch can easily upgrade to a bolt on TC2 torque converter saving money from burned up CC units
- Comet Torque Converter 30 Series small engine belt drive pulley clutch kit will help with more take off power, smoother acceleration, climbing ability, and top end speed by providing more torque in the low end and higher speeds in top end.
- Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches
- Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton, Honda and clones, Kohler, Lifan, Robin, and Tecumseh motors.
- Driver clutch bore: 1″(24.5mm),Driven unit: Overall Diameter 6″ (5/8″ driven pulley) ,This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jackshaft with sprocket, all mounting hardware, and instructions. Includes both 10t for 40/41 chain and 12t for 35 chain
Description
This kit comes with a 5/8" Driven Clutch with 6" inner Diamerer. fits all engines with a 1" Straight Crankshaft, replaces Comet, also fits Manco Go Karts, Comet 219554A.Go kart torque converters are CVT transmission systems for go karts, minibikes, small vehicles, jr, drafster, golf karts, odyssey, snowmobiles, ATVs, lawn equipment, industrial, winch and more. Torque converters and replacement parts are fully compatible with come-t and tav2 torque converters.
Technical Parameters:
Drive clutch bore: 1"(25.4mm)
Driven Clutch Bore: 16mm
Driven unit: Diameter 157mm or 6" (5/8" driven pulley)
Sprocket teeth: 10 teeth #40/41chain and 12 teeth #35 chain
Engagement range: 2350±200 RPM
Recommended engine: engines，1" shaft with flat key
Belt: Asymmetrical type
Package Content:
1 x Drive belt
1 x Plastic Assy Cover
1 x 1" Driver pulley
1 x 5/8" bore driven pulley 6" diameter
1 x Aluminum Mounting Bracket Plate
1x 12 Tooth Sprocket for #40/41and 1x 10 Tooth Sprocket for #35
1 x Full Mounting hardware Kit
This kit has everything you will need!!
Please see pictures for all that is included.
2. 40 Series Go Kart Torque Converter Kit With Belt, Clutch Pulley Driver Driven 8 to 16 HP
Feature
- 40 Series Torque Converter Kit with Quick-Mount Backing Plate and Jackshaft
- Fits 9hp to 16hp Go Karts and Engines with a 1″ Crankshaft and 1/4″ Keyway
- Includes Driver Clutch, Driven Pulley, Belt, Cover, and Quick Mount Backing Plate With Jackshaft
- Will save you tons of time on installation!
- Replaces OEM Part Numbers 203015, 203015A, 209133A, 209133, 209139A, 209139, 209151A, 209151, 2432
Description
Brand New!
40 Series Torque Converter Kit
For 9HP – 16HP Go Karts Fits ALL 9HP – 16HP engines with a 1″ straight crankshaft and 1/4″ keyway.
You will only find this very easy to install 40 Series Torque Converter Kit here at Auto Express! No Jackshaft Required. Comes with Driver Clutch, Driven Clutch, Belt, Jackshaft and all mounting hardware attached to an easy to mount backing plate. This Kit will save you a ton of time on install!
Please look at picture in listing to see the mounting dimensions to be sure this will fit your engine. Mounting hole measurements: Between centers of holes 3 1/2″, Measured diagonally 5″
Replaces Comet 40 Series and Many Others
Replaces OEM Part Numbers:
203015, 203015A, 209133A, 209133, 209139A, 209139, 209151A, 209151, 2432
3. Centrifugal Clutch Assembly 1" Bore and 14 Tooth 40/41/420 Chain Sprocket for Go-Karts Mini Bike Lawnmower Engine
Feature
- This clutch is used primarily on Go Kart and Mini Bike, Lawnmower and Fun Kart, also it can be used for many other applications
- Tooth:14
- Work with #40/41/420 Chain (Chain Not included)
- 1″ bore Designed for 6.5hp 212CC Engines
- Made of high quality iron material,which is lightweight, portable, sturdy, durable, maximum torque, wear-resisting and fast heat dissipation
- Package included:1 x Go Kart Centrifugal Clutch
4. Go-Karts Parts & Accessories Predator 212cc 6.5HP Centrifugal Clutch 3/4" Bore 12 Tooth #35 Chain screw sets
Description
3/4″ bore 12T Clutch for #35 chain with 3′ of #35 chain
5. Auto Express Go Kart 1" Torque Converter Kit CVT Clutch Comet TAV2 Manco 10T 40/41 12T #35
Feature
- Complete 1″ Inch Torque Converter Set
- This Kit Includes: 1 x Drive Belt, 1 x Plastic Cover, 1 x 1″ Driver Pulley, 1 5/8″ Driven Pulley, 1 x Aluminum Mounting Plate, 1 x 12 Tooth Sprocket for #35 Chain, 1x 10 Tooth #40/41 Sprocket, 1 x Mounting Hardware Kit
- Includes Two Sprockets
- 1x 10 Tooth #40/41
- 1x 12 Tooth #35
- 1 Year Warranty
Description
This is a high quality, complete torque converter kit for go karts and custom applications. This will replace both Comet and Manco parts.
That kit includes:
1 x Drive Belt
1 x Plastic Cover
1 x 1″ Driver Pulley
1 x 5/8″ Driven Pulley
1 x Aluminum Mounting Plate
1 x 12 Tooth Sprocket for #35 Chain
1x 10 Tooth #40/41 Sprocket
1 x Mounting Hardware Kit
6. Centrifugal Clutch 3/4 Bore 10T for #40/41/420 Chain Compatible for Go Kart Minibike Lawnmower Fun Kart Engine 3/4 Bar
Feature
- Fits for Go Kart and Mini Bike, Lawnmower and Fun Kart
- Fits for Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc, briggs and Stratton Tecumseh Engines
- Also fits any other engines with 3/4 crank shaft and 3/16″ key way, most 5.5 HP clones, 6.5 HP clones
- Tooth: 10T sprocket for #40/41/420 chain
- Package included: 1 x Centrifugal Clutch
- 1 x #40/41/420 Chain
7. Torque Converter Go Kart Clutch Set Compatible for 30 Series Manco Comet TAV2 3/4" Bore 10T #40#41#420 Chain Mini Bike Engine Kit
Feature
- Package Included: 1 x 3/4″ Driver clutch bore, 1 x Overall Diameter 6″ (5/8″ driven pulley), 1 x 10 Tooth Sprocket for #40 #41 #420 Chain (Chain not included), 1 x Drive belt, 1 x Plastic Assy Cover, 1 x Full Mounting hardware Kit, 1 x Aluminum Mounting Bracket Plate. (As Pictures Shown)
- Engine Compatability: 6.5 HP (212cc) OHV Horizontal Shaft Gas Engine. 3/4″shaft with flat key
- Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton, Honda and clones, Kohler, Lifan, Robin, and Tecumseh motors
- Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches. Engagement range is approximately 2350 RPM
- however, this can be adjusted from Minimum 1200 RPM – Maximum 3100 RPM by changing out springs (not included) and other adjustments
- Replace Part Number: Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, 203814A 30-75
Description
Ameetaa’s go kart torque converter clutch is a replacement kits for the Comet TAV2 go-kart 30 series. This kit comes with jackshaft sprockets for the 10T #40/41/420 chain. It is made of high quality iron and aluminum, which is sturdy and durable.With this clutch,it can help you get more power out of your small engine by reducing engine load and allows higher speeds out of your small engine,smoother acceleration.
Specifications:
– Material: Iron & Aluminum
– Package Dimensions: (13.78 x 13.78 x 7.48)” / (35 x 35 x 19)cm (L x W x H)
– Weight: 11.24 lbs / 5.1 kg
– Fits: All engines with a 3/4 inch straight crankshaft
– Sprocket teeth: 1 x 10 Tooth Sprocket for #40 #41 #420 Chain (Chain not included)
– Fitment: Go Karts 30 Series
– Replacement:Comet, Predator, Manco and more
– Front Drive Clutch Bore: 3/4″(19mm)
– Rear Drive Clutch Bore: Overall Diameter 6″ (5/8″ driven pulley)
– Features:Durable, Maximum torque, Wear-resisting, Fast heat dissipation
Package Includes:
1 x Drive belt
1 x 3/4″ Driver pulley
1 x 5/8″ Driven pulley 6″ diameter
1 x Plastic Assy Cover
1 x Full Mounting hardware Kit
1 x 10 Tooth Sprocket for #40 #41 #420 chain (Chain not included)
1 x Aluminum Mounting Bracket Plate
8. FDJ Minibike Go Kart Clutch 3/4" Bore 10 Tooth for #40/41/420 Chain
Feature
- Heavy Duty 10T Sprocket for 40/41/420 Chain 212cc Predator Belt Drive Centrifugal Clutch
- 3/4″ Bore Designed for 2-7Hp 212 Predator Engines Clutch Performance Parts
- 3 4 inch Centrifical Clutch for Single Wheel Belt Direct Drive Karts with Tires No Larger Than 15″ Tall
- Fits 2 – 6.5HP Small Engines HONDA GC160, GC190, GX120, GX140, GX160, GX200
- Fits Go Cart Motor Auto Engine Tecumseh Clutch 6.5 Horsepower Motor with 3/4″ Bar Shaft and 3/16″ Key Way
9. MOOSUN Go Kart Centrifugal Clutch 1" Bore 14 Teeth 40/41/420 Chain Mini Bike Engine
Feature
- Made of high quality iron material,which is lightweight, portable, sturdy, durable, maximum torque, wear-resisting and fast heat dissipation
- Sprocket: 14 teeth,For Chain: #40/41/420,(chain not included)
- 1″ bore designed for 6.5hp 212CC engines, Fit for Go Kart and Mini Bike,Lawnmower
- Centrifugal Clutch built in 14 tooth, 1″ bore, 40/41/420 chain with 3/16 key
- Mounts onto crankshaft using bolt and washer on the end of the crankshaft
Description
If the centrifugal clutch is broken or malfunctioned, you should change it with a new one without any delays. Otherwise, it would endanger yourself, your friends or families. Under this circumstance, you should buy a centrifugal clutch and this Go Kart Centrifugal Clutch would be a great choice. Made of high quality material, this centrifugal clutch is reliable and durable in use. With fine workmanship, this centrifugal clutch can function well exactly as same as the original one. Reasonable in price and quality, it can be the best choice for you!
Specifications:
Clutch Bore: 1"
Sprocket: 14 teeth
Clutch Dia: 107mm
Clutch Height: 56mm
Chain: #40/41/420
Engagement Speed: 2200±200 RPM
Recommended Engine: 2HP – 6.5HP, 1" shaft with flat key
This Kit Includes:
1x 14 teeth #40/41/420 chain centrifugal clutch(chain not included)
2x screws
10. Centrifugal Go Kart Clutch,KIOIPO,13HP Go Kart Centrifugal Clutch 1inch Bore 14T 14 Tooth For 40 41 420 Chain,1 Inch Clutch
Feature
- Centrifugal clutch 1″ bore 14 tooth design. Suitable for 40-41-420 roller chain- up to 13hp horsepower.
- A high quality and professional clutch. Engaging speed up to be 2300 RPM.
- High impact,wear resistant that is super durable. Commonly used on go kart clutch, mini bikes,
- Replace the old broken 1inch bore clutch 41 chain. User-friendly controls for easy starting and operation
- [COMPATIBILITY]: Fits 13hp go kart centrifugal clutch 1inch bore 14t 14 tooth for 40 41 420 chain mx
Description
????????????Dear friends, Welcome to ???? KIOIPO ????
????????????
Our aim is to provide the best products and services for you to make your life more comfortable and convenience
CCentrifugal Go Kart Clutch,KIOLPO,13HP Go Kart Centrifugal Clutch 1inch Bore 14T 14 Tooth For 40 41 420 Chain
Description
☛ Shaft Bore :1″
☛ Accommodates: #40/41/420 Chain (Chain Not included)
☛ Chain Tooth:14
☛ Quantity: 1 set
☛ Material: Iron
☛Weight: 2.76 lbs / 1.25 kg
☛ Fit Machine:This clutch is used primarily on Go Kart and Mini Bike, Lawnmower and Fun Kart
☛Features: Durable, Maximum torque, Wear-resisting, Fast heat dissipation
Package Contents
☛1 x clutch
☛2 x screw
Conclusion
By our suggestions above, we hope that you can found 13 Hp Go Cart Clutch Kit 1 for you.Please don’t forget to share your experience by comment in this post. Thank you!
