759 reviews analysed
1. Duda Energy STpvc075-025ft 25′ x 3/4 ID Steel Wire Suction PVC Flexible Tubing High Pressure Heavy Duty UV Chemical Resistant Vinyl Hose
Description
PVC tubing is a polyvinyl chloride plastic with plasticizers to make it more flexible and transparent. The steel wire design helps reinforce the strength of the hose to allow for both high pressure and use in suction applications. The hose is capable of maintaining full vacuum at room temperature. The Duda Energy steel wire PVC tubing works excellent in many fluid applications where general chemical resistivity and high pressure handling is required. For industrial use only. This PVC tubing may not be used with food products or drinking applications.
2. Makita 192108-A 3/4-Inch ID/1-ODdiameter by 10-Foot Hose
3. HPS 3/4" ID Red high Temp Reinforced Silicone Heater Hose, Max Working Pressure 70 psi, Max Temperature Rating: 350F, Bend Radius: 3"
4. Gates 28491 Heater Hose – Polybagged
5. FLEXFAB 3/4" X 5′ Blue Silicone High Temperature Heater Hose 5526 (Made in USA)
Description
FlexFab Series: 5526 Part Number: 5526-075 Inside Diameter (ID): 0.75″ (19mm) Outside Diameter (OD): 1.08″ (27mm) Hose Length: 5′ Bend Radious: 5 times the Hose ID Wall Thickness: .140″ / .170″ Weight LB/FT: 0.250 Actual Burst Pressure – PSI: 300 SAE J20 R3 Class A – PSI: 200 TMC RP303B Class 1 Grade II – PSI: 125 Extreme temp range: -65F to +350F (-54C to +260C) Material: Blue Cover, with Nylon Fiber Reinforcement Construction: Silicone hose with 1-ply of Nylon Fiber
6. TDVS Universal Vacuum Hose Attachments Kit For Accessories Reducer Designed to Fit More Vacuums Than Any Other Adapters -5 Adapters Fits 1 1/16 to 1 3/4 inches Plus 2 1/2 to 1 1/4 Shop Vac Hose Connec
Feature
- Five Adapter attachments included. We had these designed to fit most standard vacuum hoses up to 1 3/4 inches and then we added a Generic Shop Vac Attachment and another common size adapter. We designed these to fit most vacuum hoses.
- The 4 adapters will fit into each other to make a variety of connectors. Just try one till it fits. The smallest size they will fit is 1 1/16 inches up to 1 3/4 inches. Generic Shop Vac adapter is 1 1/4 to 2 1/2 inches. Small adapter is 35mm to 32mm.
- Connect two together to make one adapter or connect all three together to make one adapter. One by itself might be all you need. Use these as a converter for your attachments to connect to your vacuum hose.
- These vacuum connectors are made out of flexible plastic and have either a tapered fit or a step fit. The generic shop vac and small adapter is hard plastic. The 3 larger ones have some give in the plastic.
- Use these to connect your power tools vacuum port to your hose in your work shop or with your shop vacuums. A common use for these adapters is connecting your vacuum hose to fit cleaning accessories and attachments.
Description
Adapters For a Variety of Connections.
Five different adapters. (NOTE- 2 Adapters come already connected together but come apart easily)
Either use one adapter by itself or use any combination of the 4 by connecting them together to create an adapter that will fit your hose. ( the generic shop vac does not fit in to any of the 4 adapters, use by itself)
After realizing there are not really any universal adapters available we had these designed to fit the most common home vacuum cleaner hoses and then added a standard one which is the small adapter and the shop vac adapter to give plenty of options.
** Just a note if you combine more than one adapter to fit a heavier floor attachment you might need a piece of tape to hold it on, just because of the weight when you pick it up and down often.** You can also glue the pieces together.
Use these to connect your power tools vacuum port to your hose in your work shop or with your shop vacuums, also can be used with dust collection systems.
Please check the size of your vacuum hose, also feel free to message us on Amazon and we will be glad to assist.
7. Mirka 91100-A 3/4-Inch by 12-Feet Vacuum Hose for Vacuum Blocks with adapter
8. Fuel Line 3/4" ID NBR Hose Push on Hose 0.9 OD Engine Liner Compatible with Fuel System, E85, E10, Methanol, Oils, Lubricants and Coolant, 5 feet
Feature
- ID: 3/4 inch / 19mm, OD: 1.1 inch / 28mm, NBR liner hose, 5 feet
- Use hose barbs and clamps, transfer of petroleum products fuel lines for small engines
- Working Pressure .2Mpa. Burst Pressure 4Mpa, Handles temperature ranges of -30 to +135 C degrees F
- Designed for conveying gasoline, E-85, diesel, and bio-diesel fuels in cars, trucks, buses, etc
- The Fuel Lines are oil resistant,cold-resistant and ethanol tolerance
Description
ID: 19 mm, OD: 28 mm NBR Hose. Use hose barbs and clamps, transfer of petroleum products fuel lines for small engines
For transfer of petroleum products fuel lines vapor emission lines and vacuum smog control
NBR (nitrile butadiene rubber) push on hose / tube suit 400 & 510 series hose ends
9. Dryer Duct Cleaning Kit- Generic Vacuum Hose Attachment Flexible and 30 inch Flexible Dryer Vent Cleaning Brush and Refrigerator Coil Brush/Radiator Brush. Fits Vacuum Hoses 1 1/4 inches or Less
Feature
- You will receive – one flexible 24 inch crevice tool cleaner with 3 adapters and one long 30 inch brush
- VACUUM ATTACHMENT: 24″ Long – The tip width measures 5/8 inch check with of area you want to clean. With supplied adapters fits vacuum hoses up to 1 3/4 inches ** Does not fit Dyson **
- You can use the crevice tool without the adapters if it fits or use one or all 3 adapters to make it fit your vacuum hose. The adapters will fit into each other to make a variety of connections. Just try one till it fits. The smallest size they will fit is 1 1/16 inches up to 1 3/4 inches. You’ll probably say these REALLY are the Worlds Greatest Adapters.????
- BRUSH SPECS: Full Brush Length: 30” – Without Handle: 24-1/4” – Bristles Diameter: 1-1/2” – Steel Wire Diameter: 3/8” – Brush color: black – Handle Color: black – Longer than other brands.
- BRUSH USES: Clean your dryer lint trap, fridge coils/ condenser coils, exhaust vents, AC vents, radiators and under your appliances. Bends like a lizard in your dyer lint trap but is not too flimsy.
10. Everflow Supplies VB3400-NL Lead Free 3/4-Inch MHT Hose Bibb Vacuum Breaker
Description
Product Description
Hose Bibb Vacuum Breaker 3/4 Inch MHT – Lead Free, Approved By UPC, NSF, Approved By UPC, NSF, Working Pressure 125 PSI, And Brass Body With Chrome Plated Screw.
From the Manufacturer
Hose Bibb Vacuum Breaker 3/4 Inch MHT – Lead Free, Approved By UPC, NSF, Approved By UPC, NSF, Working Pressure 125 PSI, And Brass Body With Chrome Plated Screw.
Conclusion
By our suggestions above, we hope that you can found 34 Vacuum Hose for you.Please don’t forget to share your experience by comment in this post. Thank you!
