Top 10 Parsun 35 Hp Outboard Motor

0

We spent many hours on research to finding parsun 3.5 hp outboard motor, reading product features, product specifications for this guide. For those of you who wish to the best parsun 3.5 hp outboard motor, you should not miss this article. parsun 3.5 hp outboard motor coming in a variety of types but also different price range. The following is the top 10 parsun 3.5 hp outboard motor by our suggestions

710 reviews analysed

1. Coleman Powersports 2.6 hp Outboard Motor with Short Shaft, Black

Coleman Powersports 2.6 hp Outboard Motor with Short Shaft, Black

Feature

Description

Coleman Outboard motors are lightweight and very reliable. The 2.6HP four-stroke OHV motor runs quieter and meets EPA and CE standards. It is equipped with a TCI ignition for easy starting along with fan shifting with 360 degree steering. Additional features include: adjustable steering friction, shallow-water drive, vibration reduction, twist grip throttle, and marine aluminum alloy for corrosion protection. Motor Size : 72cc; 4 stroke; water cooled

2. Cozyel 3.5HP Heavy Duty Boat Motor 2 Stroke Outboard Motor Boat Engine W/Water Air Cooling System

Cozyel 3.5HP Heavy Duty Boat Motor 2 Stroke Outboard Motor Boat Engine W/Water Air Cooling System

Feature

Description

Technical Data:

Overall length: 92CM

Overall width: 36.5cm

Overall height: 22cm

Transom height: 42cm

Full throttle perating range: 4000-5000r/min

Maximum output: 2.5kw(3.5HP)

Speed: 20km/h(four people)

Type: 2-stroke

Ignition system: CDI system

Starting system: Manual start

Staring carburetion system: Choke start

Propeller mark: 7-1/45-A(inch)

The engine and the propeller ratio: 2:1

Recommended fuel: Regular unleaded gasoline

Fuel to oil ratio: 30:1

Gear ratio: 27/13

Maximum speed: 10 km / h

Built-in fuel tank: 1.3L

Fuel consumption per hour: 1.5L

How to start the engine

(1) Plug the emergency turn-off cable plate in the switch groove.
(2) Plug the oil inlet plug for transferring fuel in the Fuel tank socket.
(3) Plug the oil outlet plug in the tubing socket of motor’s bottom.
(4) Spin and loose the venting screw in the fuel tank cap in a counter clockwise direction.
(5) Extrude the pump a few times until the area is full with fuel and the pump goes hard.
(6) Pull shift handle to neutral position.
(7) Turn throttle handle to “start” .
(8) When the engine cooled,puII out the choke valve to increase the concentration of combustible mixture gas and be more convenient and easier to start.
(9) PuII the starting handle, untiI the initiator of the claw and the flywheel plate mesh.
(10) After the engine runs,idle operate it for 2 to 3 minutes to warm up,then pull all the choke valve to the initial position.
(11) After the engine runs, check cooled water stablely flows or not. If there’s no water or stable flowing, turn off the engine and seek for the reason.
(12) During running, hang up the turn-off rope in your wrist or belt to ensure sailing safety.

3. HANGKAI 3.5-18HP 2-4Stroke Outboard Boat Motors

HANGKAI 3.5-18HP 2-4Stroke Outboard Boat Motors

Feature

4. Anbull 2 Stroke Boat Motor, 3.6 HP Boat Engine, Outboard Motor with Air Cooling System

Anbull 2 Stroke Boat Motor, 3.6 HP Boat Engine, Outboard Motor with Air Cooling System

Feature

Description

Specification:
◆Overall length: 92CM ◆Overall width: 36.5cm ◆Overall height: 22cm ◆Transom height: 42cm ◆Full throttle perating range:4000-5000r/min
◆Maximum output:2.5kw(3.6HP)
◆Speed:13km/h
◆Type:2-stroke
◆Ignition system: CDI system
◆Starting system: Manual start
◆Staring carburetion system: Choke start
◆Propeller mark:7-1/45-A(inch)
◆The engine and the propeller ratio:2:1
◆Recommended fuel: Regular unleaded gasoline
◆Fuel to oil ratio: 25:1 (The gasoline engine must use mixed fuel with volume rate of 25:1 for No.90 gasoline to two‐stroke automobile oil.Mix and add to the tank)
◆Gear ratio: 27/13
◆Built-in fuel tank: 1.2L
◆Fuel consumption per hour: 1.5L

Feature:
1.About the noise: all the gasoline machines are noisy, the noise is the same as the motorcycle, so it is anormal phenomenon.
2.The machine itself is lightweight, it can use on boat weight of 100kg orless , load-bearing 4 people, but the speed is certainly not the same when one person on it or 4 people on it . Customer who has high expectations on speed,please be noticed.
3.It can be marched with inflatable boats, rubber boats or fishing boats.
4.Necessary: you have to prepare a boat-motor stand or Hanging board on your boat.
5.Two strokes 3.6 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode

5. Anbull 2 Stroke Outboard Motor, 3.6 HP Boat Engine Boat Motor with Air Cooling System (Upgraded Version)

Anbull 2 Stroke Outboard Motor, 3.6 HP Boat Engine Boat Motor with Air Cooling System (Upgraded Version)

Feature

6. SEA DOG WATER SPORTS Outboard Motor 2 Stroke Inflatable Fishing Boat Engine(18 HP)

SEA DOG WATER SPORTS Outboard Motor 2 Stroke Inflatable Fishing Boat Engine(18 HP)

Feature

Description

Model: 2-stroke 18P
Max.Output(kw):13.2(18HP)
Max speed(r/min):4500-5500
Gear Positions:F-N-R
cylinder:2
Displacement: 246CC
Packing size(in):47×27.7×14.8
gear ratio: 2.08(27:13)
Ignition System:CDI
Cooling System:Water-cooling
Control System:Tiller control
Starting System:Manual start
Control System:#93 gasoline
N.W./G.W.(lb):80.6 lb/104.7 lb
Bore×Stroke(in):2.2 in×1.97 in
Recommended Propeller range(in):3-9 ¼ “x 8 ”
Recommended Lubricant : Two Stroke Lubricating oil
Mixing ratio:( Fuel:Oil=50:1)
Trim and tilt system : Manual tilt
Overall L×W×H(in):34.4×13×40.9
Standard fuel tank capacity : 24L

7. 2 Stroke 3.6HP Outboard Motor Durable Corrosion-proof Boat Motor Fuel Efficient Boat Engine Brushless Motor Tiller Control Outboard Boat Engine for Inflatable Kayaks,Fishing Boats,Sailboats CDI System

2 Stroke 3.6HP Outboard Motor Durable Corrosion-proof Boat Motor Fuel Efficient Boat Engine Brushless Motor Tiller Control Outboard Boat Engine for Inflatable Kayaks,Fishing Boats,Sailboats CDI System

Feature

Description

NOTE:

Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us).our outboard motor doesn’t with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!

1.About the noise: all the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the motorcycle, so it is a normal phenomenon.

2.The machine itself is lightweight, it can use on boat weight of 100kg or less , load-bearing 4 people, but the speed is certainly not the same whenone person on it or 4 people on it . Customer who has high expectations on speed, please be noticed.

3.It can be marched with inflatable boats, rubber boats or fishing boats.

4.Necessary: you have to prepare a boat-motor stand or Hanging board on your boat.

5.There are two pull starter included in the parcel(one is the machine, another one for spare).We don’t supply wearing parts (pull starter)for free.

Don’t do the following will avoid cylinder Scoring:

1.Start the motor on bank.

2.Use the motor when it stop coming out of water.

Even if you want test the motor, it should be done in the river!

When there is no water coming out from the motor,please stop using it immediately ,then check the impeller of Water pump or check if the water outlet has been blocked.

After in the sea water or turbid water cruising:

1.Use the fresh water cleaning the outboard motor.

2.With the moderate velocity circulating the engine,cool off the water chanel with fresh water.

3.Before completely running out cooling water,don’t put the outboard motor outside. Otherwise the water cam pass the exhaust port to enter the air cylinder,from that will cause the engine breakdown.

8. DYRABREST 3.5HP 2 Stroke Air-Cooled Outboard Motor Boat Engine 40cm Short Shaft CDI Water Cooling System 2500W Outboard Motor Inflatable Fishing Boat Motor Outboard

DYRABREST 3.5HP 2 Stroke Air-Cooled Outboard Motor Boat Engine 40cm Short Shaft CDI Water Cooling System 2500W Outboard Motor Inflatable Fishing Boat Motor Outboard

Feature

Description

Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair the motor.

Don’t do the following will avoid cylinder Scoring:

1,start the motor on bank

2, use the motor when it stop coming out of water Even if you want test the motor, it should be done in the river! When there is no water coming out from the motor,please stop using it immediately ,then check the impeller of Water pump or check if the water outlet has been blocked.

About the noise:

1. All the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the motorcycle, so it is a normal phenomenon

2. The machine itself is lightweight, it can use on boat weight of 100kg or less , load-bearing 4 people, but the speed is certainly not the same when one person on it or 4 people on it . Customer who has high expectations on speed, please be noticed.

3. It can be marched with inflatable boats, rubber boats or fishing boats.

4. Necessary: you have to prepare a boat-motor stand or Hanging board on your boat.

Announcements:

After in the sea water or turbid water cruising

1.Use the fresh water cleaning the outboard motor

2.With the moderate velocity circulating the engine,cool off the water chanel with fresh water.

3.Before completely running out cooling water,don’t put the outboard motor outside. Otherwise the water cam pass the exhaust port to enter the air cylinder, from that will cause the engine breakdown.

4.The engine should deposit in the aridity and ventilated well place,avoid exposing directly in the sunshine.

5.Before the long term storing,you should run out of the gasoline in the fuel tank.

9. HANGKAI Outboard Motor 2 Stroke 3.5 HP Engine Fishing Boat Motor Heavy Duty Boat Motor Air CDI Water Cooling System USA Stock

HANGKAI Outboard Motor 2 Stroke 3.5 HP Engine Fishing Boat Motor Heavy Duty Boat Motor Air CDI Water Cooling System USA Stock

Feature

Description

Notice:

(1).Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us) .our outboard motor doesn’t with oil of gear,please prepare it by yourself .Keep in mind that you must add oil on the gear before use !!!
(2).Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair the motor.

Don’t do the following will avoid cylinder Scoring:
1,start the motor on bank
2, use the motor when it stop coming out of water
Even if you want test the motor, it should be done in the river!
When there is no water coming out from the motor,please stop using it immediately ,then check the impeller of Water pump or check if the water outlet has been blocked.

Two strokes 3.5 hp and 3.6 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode
STRICTLY FOR PROFESSIONAL USE ONLY

Please Note:
There are two pull starter included in the parcel(one is the machine, another one for spare)
We don’t supply wearing parts (pull starter)for free.
Short Shaft:40cm

Description:
Overall length:92CM
Overall widteh:36.5cm
Overall height:22cm
Transom height:42cm
Full throttle perating range:4000-5000r/min
Maximum output:2.5kw(3.5HP)
Speed:10km/h
Type:2-stroke

10. DNYSYSJ 18HP 4 Stroke Outboard Motor, Water Cooling System Boat Motor Heavy Duty Boat Engine for Inflatable Fishing Boat, CDI Ignition System 246CC, 5000-6000 r/min

DNYSYSJ 18HP 4 Stroke Outboard Motor, Water Cooling System Boat Motor Heavy Duty Boat Engine for Inflatable Fishing Boat, CDI Ignition System 246CC, 5000-6000 r/min

Feature

Description

Must Read before using!

2 Stroke 18 HP:

Firstly, Fill the gear oil (open gear box lid and fill it).

Secondly, Fill NO. 92 petrol, lightly press oil pump 6-10 times.

Thirdly, Fill engine oil don’t exceed the head of the pattern.

Forthly, turn the throttle to the start up and turn the accelerator gets up to 50%.

Then, Rapidly pull the starter line.

After the motor start, please turn the throttle to running state.

Then, it can be operated now.

 

Parameter:

Displacement: 246CC

Short shaft :40cm

Gear ratio: 2.08(27:13)

Cylinder: 2

Max.Output(kw): 13.2

Max.speed(r/min): 5000-6000

Gear Positions: F-N-R

Packing size: 133x71x38.5cm

Ignition System: CDI

Cooling System: Water-cooling

Control System: Tiller control

Starting System: Manual start

Control System: #93 gasoline

N.W./G.W.(kgs): 38.6/49.5

Bore x Stroke(mm): 56×50

Recommended Propeller range: 3 -9″1/4”x8″

Recommended Lubricant: 2 Stroke Lubricating oil

Mixing ratio: Fuel:oil=50:1

Trim and tilt system: Manual Tilt

Overall LxWxH(cm): 78.3×33.2×105.3

Standard fuel tank capacity: 24L

Don’t do the following will avoid cylinder Scoring:

1,start the motor in the water

2, use the motor when it stop cyling water

Even if you want test the motor, it should be done in the river!

When there is no water coming out from the motor,please stop using it immediately ,

then check the impeller of Water pump or check if the water outlet has been blocked.

 

 

About certification:

We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.

Several issues with this motor first the linkage that goes from the gear selector to the s

Conclusion

By our suggestions above, we hope that you can found Parsun 35 Hp Outboard Motor for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general