Top 10 5 Hp 3 Phase Motor

AC motor, 1.5Hp, 1725Rpm, 3pH/60Hz, 208-230/460VAC, 56C/TEFC, with foot, sf 1.15, insulator F, inverter duty.

※FEATURES OF 3 PHASE MOTOR Compared with 1 Phase Motor ■ Low failure rate ■ Small size ■ High efficiency ■ Affordable price NOTICES ■ This product shall be used only for 3 phase 220V motor. ■ Use only a motor which suits the capacity range of this product. (1:1) ■ If the motor overheats, check whether the current is correct as shown on the motor nameplate. (Within 85% of rated) ■ Only DPS check the voltage is the output voltage 2 phase and the output voltage 3 phase when the only motors movable ■ If you use a motor for a large load condition, use the D.P.S product with one rating higher. Do not use it with higher than one rating. (This may cause motor failure.) ■ Motor brake must be of single phase only (A brake for 3 phase does not work). ■ For control cables, use U.W cable only (Electromagnetic switches, brake, magnet, etc.) SPECIFICATIONS APPLICATION RANGE : 3 phase 220V motor type RATED VOLTAGE : 3 phase 220V ± 10% HOW TO CONVERT : Relay control circuit for three-phase driving AMBIENT TEMPERATURE : -10 ~ 50℃ AMBIENT HUMIDITY : Within 95% ENCLOSURE : Open type (IP54) INSULATION RESISTANCE : 100MΩ or higher based on 500VDC MEGA WITHSTANDING VOLTAGE : For 1 minute at 1500VAC 50/ 60Hz between power supply terminal and external terminal : POWER CONSUMPTION : Within 85% of motor rated current APPLICATIONS ■ All products driven by 3 phase motors ■ All motors for industrial and domestic purpose ■ Hoists ■ Compressors ■ Conveyor motors ■ Agitators ■ Food processing machines ■ Hydraulic motors ■ Cutters, etc. ※These products can be connected for use quickly and easily everywhere.

Product Description

Applications:

All machines used for motors are applied to MAGNETIC STARTERS, such as: drilling Machine, press contour machine(band saw), tapping machine, sewing machine, conveyor, packing machine, air compressor, air pump, air conditioner and specific machine, etc.

From the Manufacturer

Magnetic disconnect switch protects you from unexpected startups after a power interruption. They also protect your equipment from overload by limiting the current available to the motor. 3-Phase, 220-240-Volt, 5-HP,12-18-Amp

Introduction

This VFD can be used for constant torque loads(such as hard starting:Air conpressor,HVAC units) and variable torque loads(such as pumps,fans,etc) It can be used as a motor speed control and a phase converter.The inpute for this VFD is 1 or 3 phase as you like.You can control different speed when you use this VFD.Most of our customers bought this VFD from us to use for:Lathes,Mill,car Hoists,Pumps&conveyors,etc.This item use sine wave PWN(SPWM) for the control system and performace excellently.

Technical Parameters

Input voltage:220V±15%(we also stock 110V and 380V+/-15%,please contact us for item stock)
Input Frequency: 48 to 63 Hz
Output Frequency: 0 to 400 Hz
Input Phase: 1 or 3 phase as you like
Output Phase: 3 phase

Features

1.Our item adopts the Japan Mitsubish chip;
2.PID control; advanced calculous PID closed-loop arithmetic, quick responding speed and high suitability;
3.Easy PLC function can realize 16 legs of speed and inverter control function;
4.RS485 communication port, adopting standard international MODBUS main circuit control;
5.With extremely strong anti-jamming capability;
6.Low output ratting torque, low speed running ability;
7.Carrier adjustable by 16KHZ, completely soundless working environment;
8.Broad voltage working area;
9.Auto voltage regulation (AVR) technique, for ensuring the inverter load capability;
10.Various control technique by both synchronization and non-synchronization, dynamically realize fast starting without changing brakes