Top 10 Pool Pump 2 Hp At 220 Volts

Powerful performance with cost saving benefits! The TidalWave 2-speed energy efficient above ground pool pump lets you choose the pump speed that best fits the job for great energy cost savings. Slower flowing water means less friction in your filter and plumbing system, and thus less energy usage, so set the pump to low speed for everyday operation. When more power is needed to vacuum the pool or run other accessories, switch pump to high speed. Featuring corrosion proof polymer construction that will deliver years of reliable service, these pumps also provide a convenient hair/lint trap to ensure crystal clear water. The TidalWave high performance pump is quiet, efficient and self priming. Top discharge design fits most filters and its extra large clear lid allows for easy cleaning. Replace your old inefficient pump with this 2-speed water moving dynamo. Comes with a 6ft cord – 110volt AC Available in 2 sizes: 1 HP and 1.5 HP

The replacement 1.65 Total Horsepower (THP) swimming pool pump motor fits a wide variety of pool pumps including American Products, Pentair, Astral, Hayward, Jacuzzi and Jandy. Save yourself the time, headache, and hassle of re-plumbing and the expense of buying a whole new complete pump by replacing your old worn-out motor with a new THP replacement motor. The standard 56J-Frame, C-Flange motor features four 3/8-Inch threaded bolt-holes at 1, 5, 7 and 11 o’clock with a threaded motor shaft on the end. Each replacement motor is quality made, guaranteed to last, and covered by a full 1 year warranty. The new 1.65 Total Horsepower motor can be used to replace a 1.5-HP Up-Rated or 1-HP Full-Rated motor and is wired for 115/230 volts. It is highly recommended to replace pump seals, gaskets and lubricants when replacing your pump motor. US Motors Model: AST165.

Product Description

Plug in and leave the pump unattended for worry-free water removal. Ideal for crawl spaces, flat roofs, window wells and other problem areas around the home where water accumulates.

From the Manufacturer

Plug in and leave the pump unattended for worry-free water removal. Ideal for crawl spaces, flat roofs, window wells and other problem areas around the home where water accumulates.

Product Description

The Wayne WLS150 cast iron sprinkling pump pumps up to 2320-gallon per hour at 30 psi. It’s features include a durable cast iron volute and corrosion-resistant, reinforced thermoplastic infuser and impeller. The dual voltage motor is factory wired for 230-volt. The pump is designed to operate underground sprinkling systems, draw water from well, lake or ponds for watering, pool filling or any other applications where high water column is needed.

From the Manufacturer

The Wayne WLS150 cast iron sprinkling pump pumps up to 2320-Gallon per hour at 30 PSI. It’s features include a durable cast iron volute and corrosion-resistant, reinforced thermoplastic infuser and impeller. The dual voltage motor is factory wired for 230-Volt. The pump is designed to operate underground sprinkling systems, draw water from well, lake or ponds for watering, pool filling or any other applications where high water column is needed.

Product Description

1/2 hp, submersible, non-clogging, vortex design utility pump, pumps up to 2500 gph at 0′, corrosion resistant reinforced thermoplastic housing, volute & impeller, bottom suction design filters debris & removes water down to 1/4 inch of surface, passes up to 1/2 inch solids, 1 1/4 inch nps high volume discharge with 3/4 inch Garden hose Adapter, easy access handle for portability. This product is assembled in the USA.Easy installation and easy handling.

Amazon.com

The Wayne 1/2 HP 2,500 GPH submersible utility water pump can handle material up to 1/2-inch thick without getting clogged. It can pump out 2500 gallons per hour, with a bottom suction that takes out water to within an eighth of an inch of the surface. Glass reinforced thermoplastic for the housing, volute, and impeller prevents rust, the 3/4-inch adjustable discharge adapter easily connects to garden hoses, and an easy-access handle provides complete portability. Wayne backs its pump with a one-year limited warranty.

SUBMERSIBLE WIRE SPLICE KIT INCLUDED WITH EVERY PUMP PURCHASE!

This is our Stainless Steel Deep Well Pump which is ideal for the Supply of fresh water to rural homes, farms, and cabins that have 4 inch and greater diameter drilled wells. It is a durable workhorse that will keep you in flow for years to come. 

-The pump has a thermally protected motor with a 95°F maximum work temperature to keep from overheating while in use.

-The 3-wire + ground wire design provides a control box for easy provision and energy efficiency.

-The outlet is also made from stainless steel and not iron or brass like lesser quality pumps.

-The well pump submersible is easy to install and extremely versatile.

-Heavy duty stainless steel body fit for home usage and industrial.

-This pump model can not work dry, that will cause serious and irreversible damage to the motor. Make sure that the pump is install at a depth where it will be fully submerged at all times.

-This pump model features a built in check valve, however this check valve is only used to prevent water from going back in the pump and causing backspin of the impellers, but if you are going to use the pump in a pressure system YOU NEED TO USE AT LEAST ONE EXTERNAL CHECK VALVE IN THE PIPE, the valve in the pump won’t fulfill that function.

-2 years warranty.

NOTICE: Our pumps are checked for physical damage before they’re shipped. As soon as you receive it check for any damage that might have occurred during shipping, and please report it to Amazon if you see any.

NOTICE 2: This pump is designed to be used in clear pure water only, even an small amount of sand diluted in the water will damage it, make sure your well pumps clear water before you install it, this is important because damages caused by sand are not covered by the warranty.

Product Description

The Basement Watchdog 1/3 HP, Top Discharge Primary A/C Sump Pump with caged Dual Float Switch is ultra-compact and powerful.

From the Manufacturer

Not all sump pumps are created equal. The complete line of Basement Watchdog AC pumps is rated for continuous duty, which means they are built to run continuously 24 hours a day, 365 days a year. They-Fleeter strong and dependable, and when they are used intermittently in a sump application, it extends the life of the pump. We back this up by offering a 3-year warranty on all models when used in intermittent applications. 115V. 60Hz. 1/3 Horsepower.

Product Description

3/4 hp submersible sump pump with 8′ power cord and 2″ discharge; continuous duty, efficient 115V psc (permanent split capacitor) 8 Amp motor for lower carbon footprint; Pumps up to 6000 gph. Maximum head is 34 feet. ECO-FLO Products exceed the competition in flow and head performance. Test laboratory and ISO 9000 facility account for quality built pumps that are all CSA approved. The ECO-FLO commitment is to produce pumps for the long term at the best value. Click on the ECO-FLO Products link at the top of this page to see more pump options from ECO-FLO Products.

From the Manufacturer

ECO-FLO Products exceed the competition in flow and head performance. Test laboratory and ISO 9000 facility account for quality built pumps that are all CSA approved. The ECO-FLO committment is to produce pumps for the long term at the best value.

Product Description

ECO-FLO Products exceed the competition in flow and head performance. Test laboratory and ISO 9000 facility account for quality built pumps that are all CSA approved. The eco-flo commitment is to produce pumps for the long term at the best value.

From the Manufacturer

ECO-FLO Products exceed the competition in flow and head performance. Test laboratory and ISO 9000 facility account for quality built pumps that are all CSA approved. The ECO-FLO committment is to produce pumps for the long term at the best value.

The WaterAce products WA50SAS cast iron sump pump is made with heavy duty cast iron construction and a thermoplastic volute. It has built-in thermal overload motor protection. The vertical switch allows it to operate in 11 inch basins. The WA50SAS has a non-clogging vortex and a thermoplastic impeller that will handle up to 1/2 inch solids. WaterAce products exceed the competition in flow and head performance. Test laboratory and ISO 9000 facility account for quality built pumps that are all CSA approved. The WaterAce commitment is to produce pumps for the long term at the best value. Click on the WaterAce products link at the top of this page to see more WaterAce products.