618 reviews analysed
1. Neiko 30253A Water & Oil Separator For Air Line | 1/4" Npt Inlet & Outlet | 150 PSI
Feature
- Eliminates water, oil, dust, and particles in air line from air compressor
- Universal 1/4-inch NPT inlet and outlet design connects air line with pneumatic air tools and spray guns
- max operating air pressure is 150 PSI
- Features large push button for drain valve to filter when cleaning and doing maintenance
- Catches water vapor and oil particles from entering spray guns to preserve tool life and provide a cleaner paint job
- Rust-proof aluminum housing and brass fittings provide additional tool durability
2. DIESEL FUEL FILTER/WATER SEPARATOR FOR R12T MARINE SPIN-ON HOUSING 120AT
Feature
- For R12T Marine Fuel Filter/Water Separator complete assembly.NPT,ZG1/4-19
- This spin-on filter design is simple to replace and the reusable clear nylon collection bowl and features a self-venting drain for removing unwanted muck and water.Tighten the valve, the water will not discharge. Release the valve, the water can be free to discharge.
- One Year Warranty
- This spin-on filter design is simple to replace and the reusable clear nylon collection bowl and features a self-venting drain for removing unwanted muck and water.Tighten the valve, the water will not discharge. Release the valve, the water can be free to discharge.
- Filters are designed for high performance applications, and with flow rate of 30 GPH on the R12T model, your engine will perform better than ever with clean, water-free fuel
Description
Specification:
1.Fuel Water Separating Filter fit 3/8 Inch NPT Outboard Motors as well.
2.Maximum Flow Rate 30 GPH (57 LPH).
3.Port / Connecting Size M18 X 1.5 Center Thread.
4.These are more suited to compact off road diesel
equipment:tractors,skid steers loaders,movers.
5.Filter Rating 10 Micron.10 micron filters are over 90% efficient at removing particles as small as 10 microns.
10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems, Designed to trap the smallest particles and emulsified water from Diesel.
3. ACDelco 215-454 GM Original Equipment Secondary Air Injection Pump
Description
An ACDelco GM Original Equipment Secondary Air Injection Pump is an emission control component and is a GM-recommended replacement for your vehicle’s original component. The secondary air system injects air into your vehicle’s downstream exhaust system to assist in reducing emissions. This original equipment secondary air injection pump has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
4. OTOHANS AUTOMOTIVE ATV Autobest Fuel Pump for GY6 50CC 125CC 150cc ATV Go Kart Scooter Moped 4 Wheeler Quad Bikes Dune Buggy
Feature
- Cast Aluminum Case Prevents Rusting While Reducing Weight
- Fuel Pump: Hole Distance: 76.5mm/3inch, Hole Diameter: 6.5mm/0.25inch, please check the size before you buy it.
- Fits for Gy6 50cc 125cc 150cc ATV Go Kart Scooter Moped 4 Wheeler Quad Bikes Dune Buggy
- OTOHANSA AUTOMOTIVE focus on provide high quality products at fair price: Professional Factory
- 3 Months warranty
- if you unsatisfy with our product, you can return to our USA warehouse, no risk.
- Package included:1 x fuel pump,1x fuel filter,1 x fuel line（as shown in main picture）
5. Airpot Coffee Carafe – Thermal Beverage Dispenser (102 oz.) By Vondior. Insulated Stainless Steel Coffee Thermos Urn For Hot/Cold Water, Pump Action Airpot, Party Chocolate Drink
Feature
- KEEP BEVERAGES HOT OR COLD FOR UP TO 20 HOURS – with this sleek and stylish insulated dispenser.
- DISPENSES EASILY AND QUICKLY – with the pump-action top. Just press down on the button at top and the beverage pours out. You can fill up to 15 coffee cups with one simple press for each
- STAINLESS STEEL CONSTRUCTION, WIDE-MOUTH TOP – Made from beautiful brushed stainless steel inside and out, so it cleans easily and never absorbs flavors. The top is wide enough to add ice cubes.
- VALUABLE BONUS – A free cleaning brush is included with your purchase. This is an important accessory for cleaning your dispenser, and similar brushes cost about $10.00.
- NO-RISK PURCHASE
- 100% MONEY-BACK 30/90 DAY GUARANTEE – Full refund for 30 days if you’re dissatisfied for any reason
- full refund for 90 days in case of any defect.
Description
Here’s a great way to serve coffee or any other beverage
at your next dinner, party or other event.
With these insulated dispensers, you can make the coffee or tea ahead of time,
and at the end of the evening it will still be fresh and piping hot.
No need for the hostess to ask “who wants coffee or tea?” and then
disappear into the kitchen to get it all ready.
Get two or three dispensers and you can give your guests their choice
of regular coffee, decaf coffee or tea, and have it all appear instantly.
The best solution for the office, work, school or camping.
These dispensers have a big 3 liter capacity
(though of course you don’t have to fill it all the way up for smaller gatherings),
and are made of double-walled stainless steel and heat-resistant plastic.
They’ll look elegant on your table or sideboard,
and the beverages dispense easily with a press of the button on top.
And of course these work for cold beverages too.
The wide-mouth top allows you to add ice cubes, so you don’t even need
to refrigerate your beverages beforehand; adding ice will chill it down in only minutes.
Order today for the most convenient and most elegant way to serve hot or cold drinks to your guests!
At Vondior, we want you to be completely happy with your purchase.
If you’re dissatisfied with this item for ANY reason, contact us within 30 days for a full refund.
And if you find any defect in your pump-action dispenser, we offer a 90-day money-back or replacement guarantee.
6. Coffee Thermal Carafe (68 Oz) + Free Brush – Large stainless steel thermos carafes, Keep water hot up to 12 Hours, double walled insulated vacuum flask, Beverage Dispenser By Vondior
Feature
- AS IF IT WAS JUST BREWED – There is nothing like the aroma of a fresh cup of coffee or the scent of an herbal tea infusion, but many carafes fail to lock in the flavor. This carafe is designed with S201 double wall vacuum insulation, preserving heat for up to 12 hours and cold for up to 24 hours, when the lid is closed, thus locking in the aroma and the perfect temperature of your drink!
- A GIFT THAT’S ALWAYS PRESENT – Finding the perfect gift for a loved one or close friend isn’t easy. Living in the age of abundance, we simply have it all. But you can’t go wrong with this carafe
- it’s a great gift for just about everyone. Suitable for home, office or travel, everyone loves a steamy drink in winter or an icy refreshing cooler in the summer. You’re sure to hit the spot giving the gift of this carafe.
- HARD-CORE QUALITY FOR SERIOUS HOT AND COLD DRINK AFICIONADOS – For a coffee, tea or hot chocolate fan, having a drink dispenser is essential. Daily use of such product often quickly ends their useful lifespan and thermal qualities. But our product’s unique vacuum resistant design and 30-day quality control testing for heat preservation, place this 68 oz. (2 L) thermos at the highest rank compared to its competitors on the market!
- THE HEAT IS ON – Sipping a hot cup of joe is not an option it’s a must. However, pouring a cup, only to realize that the coffee is bitter and lukewarm is a bad start for a new day. With the Vondior Carafe your hot beverage will stay steamy throughout the day as if it was just brewed. Outdoors or at the office, keep your thermos at your side and enjoy piping hot coffee, tea, soup or whatever you love to drink, for about 12 hours! Don’t play games with your coffee, it’s your life blood.
- 100% SATISFACTION AND A FREEBIE – Ordering on line, being disappointed and getting stuck with a poor purchase is frustrating. Don’t gamble with your money, order the Vondior Carafe today, with its full 30 day money back guarantee. In addition, you’ll receive a 10$ cleaning brush for your carafe, completely FREE with your purchase!
Description
Ever feel your morning hasn’t yet begun until you sip a steamy cup of coffee?
How frustrating it is to sip a carefully prepared beverage,
only to realize that it’s tasteless and lukewarm?
How about going out on a hot sweltering day, grabbing for your cold drink bottle,
and suddenly finding that it’s just as hot as you are?
If you don’t like compromise on the taste and refreshing quality of a great beverage,
then you must own an Vondior Carafe.
Preserving the exact temperature you desire, it will be a delight to your taste buds with every single cup.
Different strokes for different folks, but all can agree that when it comes to a drink, it’s got to be just right.
Whether it’s a crisp bright flavored cup of java providing a rejuvenating kick, or an herbal infusion offering
a tranquil pause in a hectic day, or a heartwarming cup of soothing cocoa,
the ideal container to keep it perfect and fresh is the stainless steel thermos.
Perfect for traveling with your own freshly brewed beverage to work, school or wherever.
Even if you’re not a fan of hot drinks, you will find this thermos perfect for an icy cold refreshing drink.
Whether at a party in your home or working at the office, coffee,
tea and hot chocolate are everyone’s favorite beverage, especially on chilly days.
Entertain your employees or guests with a variety of carafes containing
their favorite drink and they won’t stop complimenting you!
Order Now
We are committed to providing you excellence and satisfaction.
If you are not happy with our product, we will refund 100% of your money.
Order the Vondior carafe today and receive a FREE cleaning brush with every purchase!
Don’t wait for your next cup, it’s a risk free offer!
7. SUNGATOR 12-Pack Hose Barb Fittings, 3/8" Barb x 3/8" NPT Male Pipe Brass Fittings, Hose Adapter
Feature
- 【DURABLE】: High grade brass construction for corrosion resistance, high temperature ductility and low magnetic permeability, 3/8”barb X 3/8”NPT male pipe, 12 pack
- 【FIRM】: High strength, high hardness premium solid brass of a longer service life with thick wall, more durable than iron and iron galvanized pipe fittings, not a cast product
- 【SUPERIOR THREADS】: Deeper and smoother threads with barbed edges provide effective connection
- 【FUNCTION】: This pipe fitting can apply to water, gas, oil and fuel especially for hoses
- 【TEMPERATURES】: Solid brass can withstand up to 100 °C (212 °F)
Description
SUNGATOR is committed to bringing cost-effective products to customers, so that customers get more than they pay, high quality products to our own requirements, customer satisfaction is our pursuit!
Firm: Heavy duty solid brass has strong corrosion resistance, thicker wall extends the service time, and brass pipe fittings are durable than iron and iron galvanized pipe fittings.
Great fixation: Deeper and smoother threads allow better bite, enhancing fixation, not easy to slip.
Tips: For better sealing, we suggest that all fittings must be used with teflon tape.
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
Contents: 12 pack of 3/8”barb X 3/8”NPT male pipe.
8. Lee’s Airline Tubing, 25-Foot, Standard
Description
Lee’s Airline Tubing is designed to be crystal clear and kink resistant.
9. NMAZA 3 Jaw 10 Inch Hydraulic Gear Puller 10Ton Wheel Bearing Pulling Separator 3 in 1 Pump Oil Tube Drawing Machine M/Case
Feature
- 【POWERFUL TOOL】 : This Hydraulic Gear Puller has 10 Ton Max Capacity and 2″(50mm) Ares Travel with spread10″ ( 250mm) which can meet your working requirements
- 【3 IN 1 DESIGN】:This Wheel Bearing Pulling Separator integrates pumps, oil tube and drawing machine. Its forged steel 2 way yoke allows twin or triple leg pulls, the 3 jaw types can be adjusted from high to low point. Pump head can be turned by 360°for flexibility
- 【COMPACT & LIGHTWEIGHT】: The integral puller is compact and lightweight, Packed in blow mould carrying case, easy for you to transport or storage
- 【EASY TO USE】-Easy to carry and operate, portable structure is easy for carrying and operation
- 【WIDE APPLICATION】: This great Wheel Bearing Hub Removal Tool has wide appication, which is suitable for pulling hubs flanges, gears and bearings
Description
Overall puller 10T is an ideal new product to replace for the traditional rachet
It is of convenient operation, labor-saving use, compact structure,flexible use, light weight, small bulk, handy carry
It will not be restricted by any places
It is applicable for the factories and repair places
ITEM NO 10T
Rate Output(T) 10 tons
Max Spread(inch) 10
Reach(inch) 10
Max stroke(inch) 2
Package :plastic boxt
10. Car Hose Removal Plier Tool – Angled Auto Fuel and Vacuum Line Tube Hose Remover – Separator Pliers Pipe Repairing Tool –
Feature
- Easily removes stubborn hoses on tanks, radiators, pumps, air cleaners, etc
- For use with hoses that have a diameter measurement range from 1/4″ to 3/4″
- Designed to facilitate quick and easy access into tight areas
- A quicker and more effective method of removal than other traditional options
- Compatible with a variety of difficult disassembly pipes such as trachea, power assisted tubing, heat radiating oil pipe, water pipe, etc.
Description
Designed to remove vacuum hose or fuel lines from fittings or tubing
Masterfully engineered spring-loaded handles guarantee you will finish your job in half the time
Compatible with a variety of difficult disassembly pipes such as trachea, power assisted tubing, heat radiating oil pipe, water pipe, etc.
Our premium hose remover pliers are intended for use with hoses that have a diameter measurement range from 1/4″ to 3/4″
Specifically designed to facilitate quick and easy access when reaching into tight areas while accessing hoses
Using these pliers provides a quicker and more effective method of removal than using ones hands or a set of regular pliers.
Heavy-duty steel construction provides maxiumum strength and durability
Easily helps you remove stubborn hoses on header tanks, radiators, pumps, air cleaners, etc
Dip coated handles maximise comfort during use and prevent use fatigue
Size : Approx 20 x 7.5 x 2.5cm (7-7/8 x 2-61/64 x 1”)
Grip length: 11cm
Clamp opening range: 4-14mm
Separation range: 0-27mm
Conclusion
By our suggestions above, we hope that you can found Water Seperators For Vacuum Pump for you.Please don’t forget to share your experience by comment in this post. Thank you!
