536 reviews analysed
1. 15ft MicroUSB & MiniUSB Dash Cam Hardwire Kit with Mini/LP Mini/ATO/Micro2 Fuse, Micro to Mini (and Type-C) Port Adapters and Battery Drain Protection System
Feature
- ONE FITS FOR ALL: With Micro to Mini (left angled) and Micro to Type C port converters, the kit is basically fit for ALL Dash Cams or Car Charger like NuCam DL, Wireless Charger Phone Holder Nucharger Auto, Rexing, ROAV, Anker, DDPai, Papago etc. Also, it comes with most popular fuse types including Low-Profile Mini, Mini, ATO(Regular), and Micro2. It has left angled mini USB head. For right angled mini USB head, please search B0787LD92N.
- ENOUGH LENGTH: Overall 15ft hardwire kit can be installed basically on All vehicles. Input length: 3ft, Output length: 12ft.
- BATTERY DRAIN PROTECTION SYSTEM: Device powers off when vehicle battery voltage drops below 11.6V for protection purpose to save battery to start your engine. When car batteries are new, they’re around 12.5 Volts or more. It’s also suitable for 24V systems.It is recommended to turn on parking mode for your dash cam to save your battery power. Contact us for higher cutoff voltage model if your battery is drained too low to start your engine.
- EASY INSTALLATION: Installation is easy and clean without any help from professionals! However, our customer service is also immediately responsive if you do have questions.
- WARRANTY: One year free service for any question you are facing with this dash cam hardwire kit.
2. Nilight 12V Car Add-A-Circuit Fuse Tap Adapter Mini Atm Apm Blade Fuse Holder-10 Pack, 2 Years Warranty
Feature
- Dual-slot fuse holder: provides one fuse holder to protect existing circuit and a second fuse holder to protect new circuit
- Easy to use: plugs into Occupied or vacant energized fuse block slot. Easy installation of additional circuits without splicing or cutting
- Versatility: Use when hardwiring or adding LED strips, dash cams or other electronic devices that require direct wiring into the fuse box
- Superior quality: made from high quality materials, good bending performance, melting resistance and excellent electrical conductivity
- Package include: 10 x Add-A-Circuit fuse holder, 10 x 15A fuse
Description
Plugs into occupied or vacant energized fuse block slot. Protects original circuit and provides lead for a new circuit for mini fuses include fuse 2. This high quality Add a circuit/fuse Kit allows easy installation of additional circuits without cutting or spicing. 3. Turn one fuse slot into two while providing protection for both circuits. 4. This Dual slot add-a-circuit/add-a-line/fuse plug provides a fuse slot for the existing OEM circuit and a second slot for a new circuit for a mobile electronic devices/accessories such as a mobile phone, radio, mobile accessories, etc.
3. Thinkware TWA-SH THINKWARE Hardwire Kit Cable for THINKWARE Dash Cams | Parking Mode | Impact and Motion Detection | Car Battery Drain Protection System | Alternative Power Supply from Fuse Box
Feature
- Connects the main dash cam unit to the vehicle’s fuse panel (Professional Installation Recommended)
- Enables Parking Surveillance mode with impact and motion detection when the car is parked
- Activates the built-in voltage meter in the main unit which monitors the battery level and automatically shuts off the device if low voltage is detected
- Connecting cable is 9.8 feet (2.98 meters) long
- Hardwiring cable is compatible with all THINKWARE dash cams (except F550)
Description
THINKWARE TWA-SH is a hardwiring cable that connects to your THINKWARE dash camera directly to your vehicle’s fuse panel, which allows the camera’s parking surveillance mode to function while the vehicle’s ignition is turned off. The built-in voltage meter in the main unit will be activated to monitor the battery level. It will automatically shut off the device if the voltage dips below the configurable voltage cut-off level. One-year manufacturer’s warranty: covers units sold at authorized retailers only. Disclaimer: Device is pre-loaded with a firmware and GPS data that are specific for use within the US only. Proper device operation cannot be guaranteed outside of the US.
4. Pruveeo Hard Wire Kit for Dash Cam with 2 Fuse Tap Cable, Mini USB Port, 12V to 5V, DC 12V – 30V Car Charger Cable Kit
Feature
- This Hard Wire Kit is Suitable for Most Vehicle Models (Voltage Between 12-30V)
- This Hard Wire Kit Has a Built-in Fuse to Protect Your Car. Come with 2 Fuse Tap Cables, Micro and Mini
- Pruveeo Hard Wire Kit for Dash Cam that Use Mini USB. Protects Against Battery Dying
- DC Output Over Current Protection. DC Output Short Circuit Protection
- Input Range: DC 11.7 – 30V Output: DC 5V – 2A. Length: 13ft
Description
This Hard Wire Kit is Suitable for Most Vehicle Models (Voltage Between 12-30V)
This Hard Wire Kit Has a Built-in Fuse to Protect Your Car. Come with 2 Fuse Tap Cables, Micro and Mini
Pruveeo Hard Wire Kit for Dash Cam that Use Mini USB. Protects Against Battery Dying
DC Output Over Current Protection. DC Output Short Circuit Protection
Input Range: DC 11.7 – 30V Output: DC 5V – 2A. Length: 13ft
5. Install Centric ICFD7BN Ford 2009-12 F-150 XL (Base) Pickup Complete Installation Solution for Car Stereos
Feature
- Includes dash kit, wire harness, antenna adapter and connectors
- Direct connection to the factory harness without cutting any wires
- Kit is made from high quality ABS, harness is made from factory quality wires and connectors
- Kit is precision designed for a gapless fit, color and texture matches the factory dash
- Easy to Install. No special tools are required. Includes step-by-step Instructions.
- Backed by Scosche’s Lifetime Tech Support and Limited Lifetime Warranty.
Description
The Install Centric ICFD7BN complete installation solution is an ideal choice for installing an aftermarket stereo into your Ford 2009-12 F-150 XL (Base) Pickup vehicles without altering the dash. Everything you need to perform a basic aftermarket stereo installation is included: the dash kit, wire harness, antenna adaptor and wire connectors. The single DIN dash kit includes a kit panel, a trim ring and brackets and is manufactured from high-grade ABS with precision tolerances so it delivers a gapless fit between the dash and the kit. The wire harness allows you to connect to the factory harness without cutting any wires. The ICFD7BN kit includes step by step instructions and colored coded wires for an easier installation.
6. Vantrue 10ft Mini USB 12V-24V to 5V Dash Cam Hardwire Kit with Mini/ACS/ATO/Micro2 Add a Circuit Fuse Holders, Low Voltage Protection for Mini USB Dash Cams, GPS Navigator, Radar Detectors
Feature
- 【Compatible 12 – 24V Vehicles】This hardwire kit connects the camera directly to the car, truck, bus, suvs, or big rig for continuous power, accepts voltage from any type of vehicles runs on 12 – 24V.
- 【24/7 Parking Surveillance】Directly to the battery for constant 24hrs/7days power to protect against theft when your car is in the parking lot.
- 【Power Supply】Directly to the ignition wire for power only so it can turn on and off with the ignition and you don’t have to worry about plugging in the charger, or turning the dashcam on, or any such stuff.
- 【Low voltage protection】It has a smart low voltage protection system that will automatically shut off the power to your dash cam when the battery voltage drops to 11.4V or 22.8V, thus preventing it draining the battery.
- 【Mulitiple uses】Mini USB plug compatible with all mini usb dash cams such as Vantrue N2 Pro/N2/X3/T2/N1 Pro/X1, GPS navigator and radar detector etc, it always frees up the cigarette lighter for other devices.
7. VanTop V9H Dash Cam Hardwire Kit, 11.5ft Mini USB Hard Wire Kit for Dashcam Converts 12V-24V to 5V/2.5A w/Fuse Kit and Installation Tool, Low Voltage Protection for Dash Cameras
Feature
- Upgraded Automatically Detection Device – VanTop V9H hardwire kit will automatically detect the state of the car ignition to start recording video without a manual setting. An upgraded automatically detection device to make it easier to run a dash cam.
- Multiple Security Protection – With low voltage protection, V9H hardwire kit will automatically cut off the power after 60s when the voltage is lower than 11.6V/23.5V (it depending on your vehicle). More security protection like over-current, short-circuit, reverse connection, and overheat.
- 24 Hours Surveillance – With VanTop V9H hardwire kit, the continuous power supply makes parking monitoring function more reliable. Besides, supported by the time-lapse shooting function to maximize the advantages of memory.
- High Compatibility – VanTop V9H hardwire kit works for almost all car mini USB devices, such as dash cam, mirror dash cam, GPS navigator, and radar detector. Specially designed for VanTop H610/H609 mirror dash cam and more VanTop models.
- Easy Installation – You will get 1 x hardwire kit, 4 x fuse taps and blade fuses, 1 x easy pry tool, and 1 x quick guide. Simple hidden wiring keeps the car neat and tidy and releases the cigarette lighter for connecting to more devices. TIPS: Please read the quick guide carefully before use.
Description
VanTop V9H Dash Cam Hardwire Kit
Specification
Input Voltage: DC12V/24V
Output Voltage: 5V-2.5A Max
Working Temperature: -40~160°F
Over-current Protection: 2.5A
Low Voltage Protection: 11.6V±0.2/23.5V±0.2
Connector Type: Mini USB
Cable Length: 3.5M/11.5FT
Package List
1 x Hardwire Kit
4 x Fuse Tap
4 x Blade Fuse
1 x Easy Pry Tool
1 x Quick Guide
TIPS
1)We strongly recommend the professional installation of the Hardwire Kit.
2)Please make sure the ignition is off before installing the Hardware Kit.
3)Carefully utilize the tool to test and check the polarity and grounding before confirming the installation.
4)For safety reasons, we strongly recommend that you do not use any fuse slot used by any of your vehicle’s critical components, such as the Air Bags.
Installation Steps
Step 1: Connect the Yellow Wire of the Hardwire Kit with one type of Fuse Taps that your vehicle requires.
Step 2: Connect the Fuse Tap to the positive terminal of your Constant Fuse Slot.
Step 3: Connect the Red Wire of the Hardwire Kit to the positive terminal of the ACC Fuse Slot in the Fuse Box. ACC Fuse Slot only has power when the ignition is on.
Step 4: Crimp the Black Wire and screw it down to any non-costed metal bolt/screw in your vehicle to ground it.
Step 5: Connect the Mini USB connector of the Hardwire Kit to the Mini USB input of your Dash Camera, and then the installation is completed.
8. Ginsco Dual USB Charger Socket Power Outlet 2.1A & 2.1A（4.2A） for Car Boat Marine RV Mobile with Wire Fuse DIY Kit Blue LED
Description
Dual USB Charger
Comes with front cap can protect the two charging ports from water drop,dust, etc
UV Nylon Body
Multifunctional product with blue LED indicator light, perfect for night use.
Can be installed vertically, horizontally or underneath the dash, or any flat surface.
Dustproof material can be used for the interior and exterior application.
Package include:
1 x Dual USB Car Charger Adapter
1 x Red/Black wire with fuse 3.3 ft
2 x Fuse 10A(1 installed)
2 x Insulated Terminals
9. REXING Smart Hardwire Kit Mini-USB Port V1 V1P WiFi Version and V3 Dash Cams
Feature
- Made to use with Rexing V1 WiFi Version, V1P WiFi Version and V3 dash cams. NOTE: This product is NOT intended to be used with the Rexing V1LG, V1P 3rd Gen, or V1P Pro.
- Input: DC12V-24V. Output: 5V, 1.5A, Mini-USB Port
- Low voltage protection: 11.4V
- Cable Length: 13ft
- Note: The kit comes with a 15A Mini type fuse, you can connect your own fuse adapter if needed.
Conclusion
By our suggestions above, we hope that you can found Dash Cam Fuse Box Wiring Kit for you.Please don’t forget to share your experience by comment in this post. Thank you!
