Top 10 Oven Ignitors 501Rb

An oven igniter allows certain oven models to heat up. When this part fails or begins to fail, the oven will fail to heat or heat properly. This flat-style oven igniter is universal and compatible with select LG models. May differ from original. Always take appropriate safety precautions when performing troubleshooting or repairs.

⚠️ Unbox and handle with care: The igniter element is extremely fragile.

Product Description

Generic Erig9998 Universal Gas Range Oven Igniter, Flat Style, Includes ceramic wire nuts & instructions.

From the Manufacturer

Generic Erig9998 Universal Gas Range Oven Igniter, Flat Style, Includes ceramic wire nuts & instructions.

‘ Hot Surface Oven Igniter, Igniter, Gas Type Nat and LP, Dial Range 3.2 to 3.6A, Capillary Length 12 In., Mounting Position All Mounting Positions, Electrical Lead 7-1/2 In. L, For Use With Gas Cooking Oven, Replaces Mfr. No. 7432P0225-60, 7432PO62-60/K, 080679701, 142-224, 336650, 4163781, 4392019, 3G8394041P03/P07/P10/P12/801, F16-743, Includes (2) Porcelain Wire Nuts ‘

GE’s flat style oven igniter will help fix ovens that are not producing heat due to a malfunctioning igniter. Igniters are designed to start the heating process within an oven. In a sense, these vital devices act as the oven’s pilot light. A broken oven igniter will most likely disallow the appliance from producing any heat, let alone enough heat to bake, broil, or roast food. GE’s flat style oven igniter (model #: WB13K21) is a replacement part for those ovens that are experiencing problems due to a malfunctioning igniter. , This igniter has a body length of 3 inches and comes complete with a mounting bracket and a wire connector that can be plugged into the oven.

Product Description

OVEN IGNITOR BROILER OR OVEN

From the Manufacturer

This General Electric WB2X9154 gas range oven ignitor works with many GE, Hotpoint, Kenmore, and RCA ovens. Assembly includes a round, carborundum-style ignitor with 2.5-3.0 amps and a 5-1/4-inch adapter plate. Replaces part numbers 1990 and 3198.

This igniter’s amperage range is 3.3 – 3.6. Used with 3.2 to 3.5 amp rated gas safety valves. Includes: high temperature stainless steel shield high temperature MGT wire leads and high temperature ceramic wire nuts to wire into original harness. Replaces long and short ignitors. Be careful not to drop your new ignitor; ignitors are fragile and will break easily. BRANDS: Frigidaire Electrolux Franklin Gibson White-Westinghouse Westinghouse Tappan Kelvinator Sears Kenmore DESCRIPTION: The oven igniter, also called a glow bar, heats up the bimetal switch and causes the oven to ignite the gas fed to the burners. A common issue when the oven fails to ignite is a faulty glow bar. If the oven does not start within 90 seconds, the glow bar is likely the issue. Do not be fooled if the glow bar turns red. If it does not reach the appropriate temperature, the oven will not light. If your ignitor uses a connector on the end, reuse the connector from the old ignitor. Use your wire cutters to cut the wires on the old ignitor several inches above the connector. Strip the ends of the wires with a wire stripper. Place the end of a wire on the connector next to the end of a wire on your new ignitor. Use a ceramic wire nut to twist and hold the wires together. Your wires are not color coded, so it does not matter which wires are connected together. Your old ignitor can get very hot even if it doesn’t ignite the burner tube. REPLACES PART NUMBERS: 316489404 USED ON MODELS:

Product description

‘ Igniter, Fits Brand GE, General Electric, Hotpoint, Sears, Kenmore and some others, Type Stove/Oven/Range ‘

From the Manufacturer

General Electric WB2X9998 Flat Oven Ignitor is common to gas ranges and ovens made by GE and other brands. This is a genuine GE factory part and comes with GE’s 1 year warranty.