Top 10 Schaefer 1 And12 Hp Submersible Pump

4″ deep well submersible pump. 2 HP, 230V, 10.2 Amps, 12 stage, 1-1/4” NPT discharge Industrial grade heavy duty, also good for home usage
* Fits a 5″ or larger well casing.
* Patented impeller & 12 stage design. 35GPM max & 400ft head are greater than almost all other 2HP well pumps, and comparable to 3HP pumps, but uses less electricity.
* Unique floating impeller design, premium seal, and UL qualified motor provide long life for this pump.
* Water temperature: (32 ~113of) Trans medium’s Ph.: 6.5~ 8.5
* Shell, motor shaft are made with stainless steel to ensure corrosion resistance.
* High quality sealed ball bearings guarantee its excellent performance.
* Built in check valve included. Installing external check valve(s) is required.
* Hermetically sealed motor with capacitor start, and thermal protection to prevent overheating, for longer life and powerful start.
* Built in control box. This pump DOES NOT require an external control box!
* This pump uses high quality and high efficient UL approved motor, UL file No.: E233961, for less energy and long pump life.
* This is a 2 wire pump with 3-Wire (2 wires + ground wire) 10′ long electric cord included.
* Heavy-duty thermoplastic impellers, diffusers, and intake screen.
* Unique design reduces its noise. User’s manual and installation tape kit included.
* 400 feet max head is for open water tanks. Refer to the ‘Pump Selection Guide’ for the pressure tank applications.
* Warranty: 12 months manufacturer’s warranty

The ST2037 incorporates a rugged cast aluminum housing, internal thermal overload protection, dual shaft seals, sealed ball bearings impeller and molded 25′ power cable with strain relief. This is a powerful versatile, low maintenance pump that is perfect for a wide range of operations supporting contractors, service utilities, Municipalities and homeowners. Built-in thermal overload protection that shuts down the pump when operating temperature becomes too high and automatically restarts once the motor cools and a proper temperature is met. The ST series single phase pumps are in accordance with ISO9001 quality management system standard. Also, all single phase models carry the UL listing for compliance with both US or Canadian electrical safety codes. The ST series single phase pumps are in accordance with ISO9001 quality management system standard. Also, all single phase models carry the UL listing for compliance with both US or Canadian electrical safety codes.

Deep Well Submersible Pump, 1/2HP, 220V/60HZ/1PH, 25 GPM Max, 150 Feet MAX, S.S. SHELL C.I Intake, 1.25 NPT discharge. Brand new product in the box! NOT ‘Manufacturer Refurbished’. We are based in the U.S., customer services, tech support & warranty are handled in the U.S.
FEATURES:
* 4″ deep well S.S submersible pump, 1/2HP, 220V, 3.3 Amps, 150 Feet MAX Head, 25 GPM Max
* Fits a 5″ or larger well casing. For 4″ casing, use pump MA0460X-9A, or MA0459X-14A;
* Patented impeller provides heavy duty higher performance and longer life than most other well pumps.
* Solid stainless steel body with heavy duty cast iron discharge
* Industrial grade heavy duty, also good for home usage.
* Built in 1/2 HP capacitor start, and thermal protection switch. For longer life and powerful start.
* Built in control box. This pump DOES NOT require an external control box!
* This pump uses high quality UL approved motor, UL file No.: E233961
* This is a 2 wire pump with 3-Wire (2 wires + ground wire),10′ long electric cord included
* 1.25″ NPT discharge
* Heavy-duty thermoplastic impellers, diffusers, and intake screen.
* This is a 2 wire pump with 3-Wire (2 wires + ground wire).
* Submersible design eliminates the need for priming and creates quiet operation.
* High efficiency and hermetically sealed motor has thermal protection prevents overheating, uses less energy.
* 150 Max head is for open water tank. The max head will be reduced in pressure tanks. Read the ‘Selection Guide’ for details!
* Installation manual, and tape kit are included.
* Free technical support available during installation.
* Warranty: 12 months limited manufacturer’s warranty

Product Description

Superior Pump builds pumps that are truly Built to Last and are 100 percent factory tested. Superior Pump uses quality components including solid copper motor windings, heavy duty stainless steel jacketed shaft seals, double o-ring seals on motor plate, and electronically controlled split capacitors. Superior Pump model 91330, 1/3 HP thermoplastic submersible utility pump with 10 foot power cord and ¾-inch garden hose adapter, will move water up to 2400 gallons per hour. Equipped with suction screen to filter out large debris and handles up to 1/8-inch solids with ease. Base of the pump is designed to fit the hub of a standard 6-inch floor drain. This pump is UL/CUL listed and CSA certified and backed by a 1 year warranty.

From the Manufacturer

Superior Pump is a family owned and operated Pump Company specializing in residential / light commercial duty pumps. Headquartered in Minneapolis, Minnesota, Superior Pump was founded in 1999 after spending years in the pump industry dating back to the 70’s, and with a plumbing background starting in St Paul Minnesota dating all the way back to 1885. Superior Pump adheres to our strong core family values, selling the absolute highest quality product possible. Known for building durable pumps, Superior Pump concentrates on quality throughout the engineering, manufacturing and testing processes. Quality products, strong warranties, excellent USA based customer service – Superior Pumps Built to Last!

Product Description

Wayne’s RPP50 1/2 hp sewage pump, pumps up to 6200 gallons per hour with 5 feet of lift. This pump is manufactured with a durable cast iron motor and pump housing and a replaceable piggyback tether switch for automatic or manual operation. The RPP50 is capable of passing 2 inch solids, and is perfect and ideal for below grade installations.

From the Manufacturer

The Wayne RPP50 1/2-Horsepower cast iron sewage pump with tether switch pumps up to 6200-Gallon per hour with 5-Feet of lift. This pump is manufactured with a durable cast iron motor and pump housing with a replaceable piggyback tether switch for automatic operation. The RPP50 is capable of passing 2-Inch solids. This pump is ideal for basement or below grade installations.