Top 10 Starite 1 Hp Vertical Well Pump

Acquaer CJE100 is a 1 HP convertible Jet Pump can be used as shallow well jet pump where depth of the well is 25 ft. and deep well jet pump where depth of well is 26-80 ft.. The pump can run at 115 or 230 volts with the quick change voltage selection switch, and the pressure switch is set to 30 psi on and 50 psi off for high-pressure delivery

Product Description

1/3 hp, cast iron, submersible sump pump, with vertical switch, pumps up to 3800 gph at 0′, designed for 11 inch diameter or larger sump basin, top suction design filters debris & minimizes clogging, designed for easy installation without any Plumbing changes, epoxy coated steel, high performance 1/3 hp, motor, 1-1/2 inch NPT discharge & durable cast iron base, easy carry handle for portability, float guard protects switch from hang ups. The product is manufactured in china. Easy installation and easy handling.

From the Manufacturer

The Wayne CDU790 features durable cast iron housing for long life and quiet operation. This submersible pump is compactly designed for 11″ or larger sump pits. The CDU series is one of the most popular replacement pumps in America. The ceramic mechanical seal assures long life in the most demanding applications and the 1 1/2″ discharge allows easy installation plus maximum flow. Similar applications to the following brands of submersible sump pumps , Craftsman, Zoeller, Flotec, Water Ace, Myers, Little Giant, Liberty, Pit Viper, Ridgid, Blue Angel, Sta-Rite, Starite, Diamond, Star, Flint and Walling, Coleman, Maytag, Jacuzzi, ShurDri, Shur-dri, GSW, Teel, Master Plumber, UL listed

Power your sprinkler or other irrigation system easily and reliably using this Red Lion Self-Priming Sprinkler Pump. The cast iron body, streamlined shape, and hardy motor make this pump fantastic for transferring water, irrigating your garden, or supplementing your home water pressure. Its 2″ diameter suction is great for a full water flow, and the discharge accepts 1 1/2″ piping to direct the water toward your supply system or holding tank. The high efficiency, thermoplastic impeller and diffuser offer plenty of durability, and the cast iron casing lasts for seasons of service. A plug at the top of the pump removes for priming the item up to 25′ prior to use. The heavy duty, single phase, 1 1/2 horsepower motor runs on either 115 or 230 volts, for plenty of water movement. The item has a maximum flow rate of 71 gallons per minute, and a working maximum pressure of 44 PSI. Place the attached, bottom bracket on a level surface as close as possible to your water source, and use bolts to secure it in a protected area for optimal performance. Keep your garden irrigation or turf sprinkler system properly working with this Self-Priming Sprinkler Pump. Two year limited . Model Number: RL-SPRK150 Dimensions: 18. 75″L x 8″W x 10″H Inlet: 2″ NPT pipe Discharge: 1 1/2″ NPT pipe Maximum Flow: 71 gpm Maximum Pressure: 44 PSI Priming Height: up to 25′ Power: 1 1/2 Hp, 18. 6 or 9. 3 amps Voltage: single phase, 115 or 230 volts Construction: cast iron, metal Mfg. : 2 year limited

The ProJet SN Series provides excellent performance with strong pressure for wells to 25 ft. deep. Quality Construction – Close-grained cast iron body. Drain port provided for easy winterizing. Precision Molded Diffuser – Pump primes faster, handles more air, with multi-port, precision-molded, reinforced polypropylene diffuser. Motor Windings – Superior insulation materials protect against excessive moisture and contaminant assure prolonged motor life. Heavy-duty Ball Bearings – Shielded, permanently lubricated bearings, extensively tested to ensure extended life and smooth quiet operation. High-flow version of the 1/2 HP model allows higher flow rates with less horsepower and pressure. Body Construction: Cast Iron. Horsepower: Available in 1/2, 3/4, 1, and 1-1/2 HP. Maximum Capacity: 13.7 GPM (SNC-HF25L model). Flow at 10' List and 40 PSI: 11.4 GPM (SND model). Max Lift: 25' Maximum Shut-off Pressure: 70 PSI (on SNC & SND models). Maximum Inlet Pressure: 50 PSI (inlet pressure + discharge not to exceed 100 psi). Pressure Switch Setting: 30 – 50 PSI (except Hi-Flow model SNC-HF25L uses 20-40). Suction Size: 1-1/4" NPT. Drive Size: n/a. Discharge Size: 1" NPT. Amp Draw (at full load): Recommended Breaker: Model and Voltage Dependent. Voltage: 115v / 230v, 60Hz, 1-phase. Maximum Liquid Temperature: 140°F (60°C).

Note : All Pumps, Are Tested By The Manufacture, Prior To Shipping. At Times You Will Encounter A Smalll Amount Of Water Residue Left Over From The Test.

Returns will not be ACCEPTED if item has been INSTALLED or there should be no signs of installation. Must be returned in the Same Packaging as received.

Acquaer SJC075 is a 3/4 hp shallow well jet pump is designed for wells up to 25 ft. Deep. The pump can run at 115 or 230 Volts with the quick change voltage selection switch, and the pressure switch is set to 30 psi on and 50 psi off for high-pressure delivery.

3/4 horsepower, 115/230 Volts, noryl shallow well jet pump. Bearing to bearing stainless steel motor shaft. 1 1/4 inch suction and 1 inch discharge. Full time run capacitor to eliminate staring wear. Stainless steel mechanical seal. Designed for a maximum vertical suction lift of 25 feet. Pumps up to 850 gph. Pump capacity: 5 feet/850 gph, 10 feet/760 gph, 15 feet/670 gph, 20 feet/480 gph, 25 feet/425 gph.

Compact: Design has an integral shallow well adapter built into the casing, which eliminates the need for a separate shallow well adapter. SERVICEABLE: Back pullout design allows disassembly of pump for service without disturbing piping. Two compartment motor for easy access to motor wiring and replaceable components. Nozzle clean out plug in pump case. Corrosion resistant, engineered plastic tubing and fittings are easily removed for cleaning. Premium O-ring Impeller: F. D. A. compliant, glass filled Noryl. Corrosion and abrasion resistant. Diffuser (Guide vane): Bolt down diffuser provides positive alignment with impeller. Diffuser also has stainless wear ring for extended performance in abrasive conditions. F. D. A. compliant, injection molded, food grade, glass filled Lexan for durability and abrasion resistance. Tubing and Fittings: F. D. A. compliant engineered plastic is corrosion and U. V. resistant. Powered for Continuous Operation: Pump ratings are within the motor manufacturer’s recommended working limits. Can be operated continuously without damage. Corrosion Resistant: Electro-coated paint process is applied inside and out, then baked on. Protected Mechanical Seal: Special diaphragm design retains water in the casing at all times to ensure the mechanical seal can never run dry. Excellent Air Handling Ability: After initial priming the pump has the ability to re-prime itself even when air gets into the system. Pumping resumes once the water level rises above the foot valve. Specifically designed for the following uses: Homes, Cottages & Booster service MAXIMUM TEMPERATURE: 140°F. SYSTEM COMPONENTS: Basic Pump Unit: Includes pump with integral shallow well jet (nozzle and venturi), motor, pressure switch and tubing. NOTE: Pumps are manufacturer tested and may contain water inside from such testing

Product Description

The Wayne WLS150 cast iron sprinkling pump pumps up to 2320-gallon per hour at 30 psi. It’s features include a durable cast iron volute and corrosion-resistant, reinforced thermoplastic infuser and impeller. The dual voltage motor is factory wired for 230-volt. The pump is designed to operate underground sprinkling systems, draw water from well, lake or ponds for watering, pool filling or any other applications where high water column is needed.

From the Manufacturer

The Wayne WLS150 cast iron sprinkling pump pumps up to 2320-Gallon per hour at 30 PSI. It’s features include a durable cast iron volute and corrosion-resistant, reinforced thermoplastic infuser and impeller. The dual voltage motor is factory wired for 230-Volt. The pump is designed to operate underground sprinkling systems, draw water from well, lake or ponds for watering, pool filling or any other applications where high water column is needed.