We spent many hours on research to finding wayne 1 1/2 hp pump, reading product features, product specifications for this guide. For those of you who wish to the best wayne 1 1/2 hp pump, you should not miss this article. wayne 1 1/2 hp pump coming in a variety of types but also different price range. The following is the top 9 wayne 1 1/2 hp pump by our suggestions
975 reviews analysed
1. WAYNE CDU800 1/2 HP Submersible Cast Iron and Steel Sump Pump With Integrated Vertical Float Switch
Description
Product Description
1/2 HP, Cast Iron, Submersible Sump Pump, With Vertical Switch, Designed For 11″ Diameter Or Larger Sump Basin. Pumps Up To 4200 GPH at 0′, Durable Cast Iron Volute, Reliable, Reinforced Poly Carbonate Impeller, Corrosion Resistant Stainless Steel Fasteners, Top Suction Design Filters Debris & Minimizes Clogging, Oil Filled, Thermally Protected Motor Prevents Overheating, Designed For Easy Installation Without Any Plumbing Changes, Epoxy Coated Steel, High Performance 1/2 HP, Motor, 1-1/2″ NPT Discharge & Durable Cast Iron Base, Easy Carry Handle For Portability, Float Guard Protects Switch From Hang Ups. This product is assembled in the USA. Easy installation and easy handling.
Amazon.com
The Wayne 1/2 HP cast iron submersible sump pump is designed for work in sump pits 11 inches or larger. Its ceramic mechanical seal keeps this pump going in even the most demanding environments, and the 1 1/2-inch discharges creates maximum flow and ensures easy installation. It works 9 inches on level or 4 inches off level. A two-pole switch prevents basement flooding in the event that one pole sticks, and disconnecting 115-volt conductors prevent damage from lightning. The automatic overload mechanism prevents damage to motor windings, permanently lubricated ball bearings need no oiling, and the waterproof three-prong grounding wire with an 8-foot extension reaches distant outlets. Wayne backs its pump with a three-year limited warranty.
2. WAYNE WLS150 1.5 HP High Volume Cast Iron Lawn Sprinkling Pump
Description
Product Description
The Wayne WLS150 cast iron sprinkling pump pumps up to 2320-gallon per hour at 30 psi. It’s features include a durable cast iron volute and corrosion-resistant, reinforced thermoplastic infuser and impeller. The dual voltage motor is factory wired for 230-volt. The pump is designed to operate underground sprinkling systems, draw water from well, lake or ponds for watering, pool filling or any other applications where high water column is needed.
From the Manufacturer
The Wayne WLS150 cast iron sprinkling pump pumps up to 2320-Gallon per hour at 30 PSI. It’s features include a durable cast iron volute and corrosion-resistant, reinforced thermoplastic infuser and impeller. The dual voltage motor is factory wired for 230-Volt. The pump is designed to operate underground sprinkling systems, draw water from well, lake or ponds for watering, pool filling or any other applications where high water column is needed.
3. Wayne VIP50 1/2 HP Thermoplastic Portable Electric Water Removal Pump
Description
Product Description
1/2 hp, submersible, non-clogging, vortex design utility pump, pumps up to 2500 gph at 0′, corrosion resistant reinforced thermoplastic housing, volute & impeller, bottom suction design filters debris & removes water down to 1/4 inch of surface, passes up to 1/2 inch solids, 1 1/4 inch nps high volume discharge with 3/4 inch Garden hose Adapter, easy access handle for portability. This product is assembled in the USA.Easy installation and easy handling.
Amazon.com
The Wayne 1/2 HP 2,500 GPH submersible utility water pump can handle material up to 1/2-inch thick without getting clogged. It can pump out 2500 gallons per hour, with a bottom suction that takes out water to within an eighth of an inch of the surface. Glass reinforced thermoplastic for the housing, volute, and impeller prevents rust, the 3/4-inch adjustable discharge adapter easily connects to garden hoses, and an easy-access handle provides complete portability. Wayne backs its pump with a one-year limited warranty.
4. WAYNE PLS100 1 HP Portable Stainless Steel Lawn Sprinkling Pump
Feature
- 1 hp
- max. Flow rate is 720 gallons per hour
- 520 gph at 10 ft. Of discharge lift
- Portable stainless steel with safe and convenient on/off switch and easy carry handle for portability
- Fan cooled continuous-duty 115 volt motor draws water up to 20 ft.
- 1 in. Npt suction and discharge threads, 3/4 in. Garden hose adapter included
- 180 ft. Of total dynamic head, maintains pressure up to 80 psi,Durable corrosion resistant construction.
- Multi-purpose 1 HP pump
- Generates suction lift up to 20 feet
- Made from rugged stainless steel
- Pumps up to 720 gallons per hour
- 1-year limited warranty
Description
Product Description
Wayne PLS100 1 hp portable stainless steel water sprinkling pump. 1 hp; max. Flow rate is 720 gallons per hour; 520 gph at 10 ft. Of discharge lift. Portable stainless steel with safe and convenient on/off switch and easy carry handle for portability. Fan cooled continuous-duty 115 volt motor draws water up to 20 ft. 1 in. Npt suction and discharge threads, 3/4 in. Garden hose adapter included. 180 ft. Of total dynamic head, maintains pressure up to 80 psi. Durable corrosion resistant construction. Lift water as high as 25 ft. And discharge pressures from 35 to 50 psi.
Amazon.com
The Wayne 1 HP 720 GPH portable lawn sprinkling pump is designed to draw water from ponds and rivers to sprinkle lawns or gardens, clear standing water, and empty or fill tanks. It’s made from durable stainless steel that holds up to wear and has threads that won’t strip. The pump generates suction lift of up to 20 feet, with a maximum discharge head of 180 feet and 720 gallon per hour maximum flow rating. The automatic thermal protection prevents overheating if small extension cords are used to power the pump, and a garden hose adapter makes start-up simple. You should use this pump with the highest amp-rated cord possible for optimum performance. Wayne backs its pump with a one-year limited warranty.
5. Wayne SEL50 1/2 hp Thermoplastic Sewage Pump with Tether Float Switch
Feature
- 1/2 hp
- max. Flow rate is 7800 gallons per hour
- 6420 gph at 10 ft. Of discharge lift
- Reinforced, corrosion-resistant, thermoplastic submersible sewage pump
- Combination 2 in. / 3 in. Npt discharge capable of handling up to 2 in. Solids
- Will replace most sewage pumps without any plumbing changes
- Piggy-back tether float switch for automatic or manual operation
- Pumps up to 7800 GPH at 0′
- Combination 2″ or 3″ NPT discharge capable of handling solids up to 2″
- Lower ball bearings for quiet operation
- Cast iron seal plate
- Easy access handle for portability
Description
Product Description
A Wayne SEL50 sewage pump is an automatic pump used when water being pumped contains solids up to 2″ in diameter. A common application is pumping waste from a bathroom to a sewer or septic line.
From the Manufacturer
A WAYNE SEL50 Sewage Pump is an automatic pump used when water being pumped contains solids up to 2″ in diameter. A common application is pumping waste from a bathroom to a sewer or septic line.
6. WAYNE PC4 1/2 HP Cast Iron Multi-Purpose Pump With Suction Strainer
Feature
- N/A
- The product is manufactured in China.Generates up to 50 PSI at outlet hose
- generates up to 15 ft. of suction lift at inlet hose
- The product is highly durable and easy to use
- Easy installation and easy handling
- 1/2 HP transfer water pump can be used to increase line pressure up by up to 40 PSI
- Use to pump out flooded basements, tanks, or boats
- Made from durable cast iron steel
- Connects to garden hose with 3/4-inch brass hose connections
- 1-year limited warranty
Description
Product Description
1/2 HP, Cast Iron, Portable Utility Pump, Pumps Up To 1450 GPH at 0′, Portable Cast Iron Transfer Utility Pump, High Performance 1/2 HP, Motor Boosts Line Pressure Up To 40 PSI, 3/4″ Brass Hose Adapters Connect To Standard Garden Hose, Portable Transfer Pump, You Can Take Anywhere & Plug In, Easy Prime Priming Outlet, Applications Include Drainage, Dewatering Flooded Basements, Emptying Stock Tanks, Draining Water Heaters, Charging Polyglycol Radiant Heating Lines, Easy Carry Cast Iron Handle For Portability, Reinforced Thermoplastic Suction Strainer Included. The product is manufactured in China. Easy installation and easy handling.
Amazon.com
The Wayne 1/2 HP 115-volt transfer water pump can pump water out of flooded basements, tanks, or boats. It can also increase line pressure by up to 40 pounds or be used to water lawns and gardens, and can even be used to wash cars and sidewalks. It’s made from durable cast iron steel. The included suction strainer keeps out extraneous material, and the 3/4-inch brass hose connections resist stripping while easily connecting to garden hoses. A top-threaded priming port is easily filled, and the ball bearings have lifetime lubrication. Wayne backs its pump with a one-year limited warranty.
7. WAYNE CDU1000 1 HP Submersible Cast Iron and Stainless Steel Sump Pump with Integrated Vertical Float Switch – 58321-WYN2
Feature
- Top suction pump design eliminates air locks and clogging from debris in bottom of sump pit
- Stainless steel motor housing and rugged, cast iron pump base
- Fully submersible
- 1 hp
- max. maximum flow rate is 6100 Gallons Per Hour, 5100 GPH at 10 feet of discharge lift
- 1-1/2″ npt discharge
- Assembled in the US with foreign and domestic parts.
Description
Product Description
The Wayne CDU1000 submersible sump pump can move up to 5400 gallons per hour (gph) at 10 feet of discharge lift. the top suction design filters debris and minimizes clogging. It is a rugged, stainless steel and cast iron submersible sump pump. This pump is designed for 11-inch diameter and larger sump pits.8 feet Water Resisitant Power Cord provides easy access to nearby GFCI(round fault circuit interrupter) protected outlet
From the Manufacturer
The Wayne CDU1000 submersible sump pump can move up to 5400 gallons per hour (gph) at 10 feet of discharge lift. The top suction design filters debris and minimizes clogging. It is a rugged, stainless steel and cast iron submersible sump pump. This pump is designed for 11-Inch diameter and larger sump pits.
8. Wayne WSS30V Upgraded Combination 1/2 HP and 12-Volt Battery Back Up System
Feature
- New and upgraded WAYNE WSS30V. Completely pre-assembled and drop in ready.
- Primary pump float switch tested to 1 million cycles, up to 10X more than competitors.*
- Assembled in the US with foreign and domestic parts
- Protection when you need it, back up pump continues running when the power is out
- Primary pump moves up to 5100 GPH at 0 feet of head.
- 12V DC back up pump moves up to 2900 GPH at 0 feet of head, one of the highest performing DC pumps on the market
- Ultra-Quiet performance
Description
The all-new Wayne WSS30V features an upgraded back up pump with epoxy coated steel and cast iron construction, no more plastic! the 1/2 hp primary pump moves up to 5100 gph at 0 inch of head and the combination 12-volt back up pump moves 2900 gph at 0 inch of head. Assembled in the USA and built to last, the WSS30V protects your basement with hours of pumping power when the electricity goes out. Battery box dimensions: 9″H X 13″W X 7″L
9. WAYNE CDU980E 3/4 HP Submersible Cast Iron and Stainless Steel Sump Pump With Integrated Vertical Float Switch
Feature
- The product is manufactured in china
- Abrasion Resistant Glass Reinforced Polycarbonate Impeller for Reliability
- The product is highly durable and easy to use. 8 feet water resistant power cord
- Easy installation and easy handling. 120 V, PSC, Oil-Filled 3/4 HP Motor
- For Use In 11 inch. Diameter or Larger Sump Basins
Description
Product Description
3/4 hp, cast iron/stainless steel, submersible sump pump, with vertical switch, designed for 11 inch diameter or larger sump basin, pumps up to 4600 gph at 0′, durable cast iron volute, reliable, reinforced poly carbonate impeller, corrosion resistant stainless steel motor housing & fasteners, top suction design filters debris & minimizes clogging, oil filled, thermally protected motor prevents overheating, designed for easy installation without any Plumbing changes, epoxy coated steel, high performance 3/4 hp, motor, 1-1/2 inch NPT discharge & durable cast iron base, easy carry handle for portability, float guard protects switch from hang ups, 5 year warranty. This product is assembled in the USA. Easy installation and easy handling.
From the Manufacturer
The Wayne CDU980E submersible sump pump can move up to 4600 gallons per hour (gph). The top suction design filters debris and minimizes clogging. It is a rugged, stainless steel and cast iron submersible sump pump. This pump is designed for 11-Inch diameter and larger sump pits.
Conclusion
By our suggestions above, we hope that you can found Wayne 1 12 Hp Pump for you.Please don’t forget to share your experience by comment in this post. Thank you!
